Rear Wheel Bearing and Hub Assembly for 2012-2015 Scion iQ - Timken HA590170

$279.99

Timken Wheel Bearing and Hub Assembly HA590170

Part number: HA590170

UPC: 053893055633

Condition: New

Weight: 5.70 LBS

Item Package Quantity: 1

$279.99

Current Stock: 10

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Timken Wheel Bearing and Hub Assembly P/N:HA590170

$279.99

Description

Timken HA590170 rear wheel bearing and hub assembly for the 2012-2015 Scion iQ holds the rear wheel and lets it turn on a sealed bearing. This Timken wheel bearing comes preset, pre-greased and pre-sealed.

Tests control the design, materials and process used to make the hub bearing assembly
Low runout reduces noise and vibration for a smoother ride
Seals have a reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes against installation damage
Bearings have precision profiles, uniform internal geometry and enhanced surface finishes for more load carrying capacity and bearing life

Quick facts

Part: Timken HA590170 wheel bearing and hub assembly
Fits: 2012-2015 Scion iQ
Position: Rear
Condition: New

A worn rear wheel bearing can show up as a humming or growling noise that changes with speed, or as vibration from the rear of the car. Tires with uneven wear can make a similar hum, so look over the tread with the car parked before blaming the bearing; a shop can test the bearing itself if the noise is still there.

Fits

This is a direct-fit replacement for the 2012-2015 Scion iQ, which takes two, one for each rear wheel. This listing is one assembly, and the two rear sides are normally replaced together.

Specifications

Fit and size

Position: Rear
Quantity per vehicle: 2
Bolt circle diameter: 100 mm (3.937 in), 4 flange bolt holes
Wheel studs: 4
Flange diameter: 135 mm (5.315 in)
Flange offset: 60 mm (2.362 in)
Brake pilot diameter: 55 mm (2.165 in)
Hub pilot diameter: 74 mm (2.913 in)
Wheel pilot diameter: 54 mm (2.126 in)

Build and materials

Drive type: Non-driven
Construction: preset, pre-greased and pre-sealed hub unit
Condition: New

Interchange: 512522 · BR930848

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

512522, BR930848

Buyer's Q&A

Frequently Asked Questions

Does this Timken wheel bearing and hub assembly fit the rear of the 2012-2015 Scion iQ?

Yes. Timken HA590170 is a rear wheel bearing and hub assembly for the 2012-2015 Scion iQ, which takes two, one for each rear wheel.

Do Timken wheel hubs like HA590170 come pre-greased?

Yes. Timken HA590170 is a rear wheel bearing and hub assembly that is preset, pre-greased and pre-sealed.

What bolt circle do these Timken hub bearings have?

The bolt circle is 100 mm (3.937 in) with 4 flange bolt holes and 4 wheel studs. The brake pilot is 55 mm, the hub pilot 74 mm and the wheel pilot 54 mm.

Which signs can mean a rear Timken wheel bearing assembly is wearing out?

A hum or growl that changes with speed, or vibration from the rear of the car, can be signs. A shop can test the bearing if you are unsure.

Does Timken HA590170 interchange with 512522?

Yes. 512522 is a listed interchange number for Timken HA590170.