Rear Wheel Bearing and Hub Assembly for 2007-2008 Ford Edge & More - Timken HA590180

$173.99

Vehicles this part fits

    Part number: HA590180
    UPC: 053893218854
    Condition: New
    Weight: 9.20 LBS
    Item Package Quantity: 1
    $173.99
    Adding to cart… The item has been added

    Have questions?

    Timken Wheel Bearing and Hub Assembly P/N:HA590180
    Timken Wheel Bearing and Hub Assembly P/N:HA590180
    $173.99
    $173.99

    Timken HA590180 rear wheel bearing and hub assembly for the 2007-2008 Ford Edge and other vehicles holds the wheel and lets it turn on a non-driven axle. The hub unit comes preset, pre-greased and pre-sealed.

    • Tests control the design, materials and manufacturing process for consistent performance
    • Low runout to reduce noise and vibration
    • Seal with reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes to prevent installation damage
    • Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for load carrying capacity
    • ABS sensors are 100% tested to monitor wheel speed for anti-lock braking systems

    Quick facts

    • Part: Timken HA590180 wheel bearing and hub assembly
    • Fits: 2007-2008 Ford Edge and other vehicles
    • Position: Rear
    • Condition: New

    A humming or growling noise that changes with speed, or looseness felt at the wheel, can mean the bearing is worn. Tires and other parts can cause similar noise, so notice whether the sound changes with speed or with turning, and have a shop confirm the cause before you replace the bearing. This listing is one hub assembly, the rear axle takes one on each side, and both sides are normally replaced together.

    Fits

    It fits the 2007-2008 Ford Edge and the 2007-2008 Lincoln MKX.

    Specifications

    Fit and size

    • Position: Rear
    • Quantity per vehicle: 2
    • Bolt circle: 114.30 mm (4.500 in), 5 wheel studs
    • Flange bolt holes: 4
    • Flange diameter: 140.00 mm (5.512 in)
    • Flange offset: 63.00 mm (2.480 in)
    • Brake pilot diameter: 72.00 mm (2.835 in)
    • Hub pilot diameter: 78.00 mm (3.071 in)
    • Wheel pilot diameter: 70.62 mm (2.780 in)

    Build and materials

    • Drive type: Non-driven
    • Construction: preset, pre-greased and pre-sealed hub unit
    • Condition: New

    Interchange: WE61013 · 512334 · BR930624

    This part cross-references / interchanges with the following part numbers:

    WE61013, 512334, BR930624

    Frequently Asked Questions

    Is this the right Ford Edge wheel bearing for a 2007-2008 Ford Edge?

    Yes. Timken HA590180 is a rear wheel bearing and hub assembly for the 2007-2008 Ford Edge, and it also fits the 2007-2008 Lincoln MKX.

    Is this Timken wheel bearing pre-greased and pre-sealed?

    Yes. Timken HA590180 is a preset, pre-greased and pre-sealed hub unit bearing assembly, and its seal has vent holes to prevent installation damage.

    What are the bolt circle and pilot sizes on these Timken hub bearings?

    The bolt circle is 114.30 mm (4.500 in) with 5 wheel studs. The brake pilot is 72.00 mm, the hub pilot 78.00 mm and the wheel pilot 70.62 mm.

    What does a worn Timken wheel bearing assembly sound like?

    A humming or growling noise that changes with road speed, or play at the wheel, can mean a worn bearing. Other parts can cause similar signs, so a shop can confirm it.

    Are these Timken wheel hubs driven or non-driven?

    This rear hub assembly is non-driven, with no splines. It supports the wheel without transmitting drive torque.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review