Timken Wheel Bearing and Hub Assembly P/N:HA590202
$241.99
(You save)
Keep your rear wheels turning quietly and true with the Timken Wheel Bearing and Hub Assembly HA590202, a preset, pre-greased and pre-sealed hub unit for the rear of the 2009-2014 Acura TSX [All] and the 2008-2012 Honda Accord [All]. This is a non-driven hub (spline quantity 0) with 5 wheel studs on a 114.30 mm / 4.500 in bolt circle and a 4-bolt mounting flange.
OE-developed process: Timken controls the design, materials and manufacturing of its hub bearing assemblies with OE-developed tests for consistent performance.
Low runout: low runout is designed to reduce noise and vibration and help braking performance for a smoother ride.
Premium seals: reinforced outer case, ribbed rubber inner diameter, contamination-exclusion system and vent holes promote positive sealing and help seal life.
Integrated ABS sensor: the ABS wheel-speed sensor is 100% tested to monitor wheel speed for anti-lock braking systems.
Signs a hub may need replacing include a wheel-bearing hum or growl that changes with speed, play at the wheel, or an ABS light. The listed applications use two per vehicle; replace both rear sides together for balanced results.
Interchange: 512353 · BR930485 Manufacturer part number HA590202
This part cross-references / interchanges with the following part numbers:
512353, BR930485
Frequently Asked Questions
Which vehicles does the HA590202 fit?
It is a rear hub assembly for the 2009-2014 Acura TSX [All] and the 2008-2012 Honda Accord [All]. Confirm your vehicle in the Buyer's Guide tab.
Is this a front or rear hub?
This is a rear, non-driven wheel bearing and hub assembly (spline quantity 0). It mounts with 4 flange bolts and carries 5 wheel studs.
Does it include an ABS sensor?
Yes. The assembly has an integrated ABS wheel-speed sensor that is 100% tested to monitor wheel speed for anti-lock braking systems.
How many should I order?
The listed applications use two per vehicle. Ordering two lets you replace both rear sides together for balanced, even results.
What are the mounting specs?
It uses a 114.30 mm / 4.500 in bolt circle with 5 wheel studs and a 4-bolt mounting flange. It comes preset, pre-greased and pre-sealed.
Write a Review
Timken
Timken Wheel Bearing and Hub Assembly P/N:HA590202
Hub Unit Bearing Assemblies: Preset, Pre-Greased And Pre-SealedTimken Uses Oe-Developed Tests Controling The Design, Materials And Process Used To Manufacture Their Hub Bearing Assemblies, Ensuring...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
