Front Wheel Bearing and Hub Assembly for 2008-2020 Dodge Grand Caravan & More - Timken HA590243

$190.99

Vehicles this part fits

    Part number: HA590243
    UPC: 053893231259
    Condition: New
    Weight: 9.80 LBS
    Item Package Quantity: 1
    $190.99
    Adding to cart… The item has been added

    Have questions?

    Timken Wheel Bearing and Hub Assembly P/N:HA590243
    Timken Wheel Bearing and Hub Assembly P/N:HA590243
    $190.99
    $190.99

    Timken HA590243 front wheel bearing and hub assembly for the 2008-2020 Dodge Grand Caravan and other vehicles carries the wheel and lets it turn on the axle. This Timken wheel bearing is a hub unit assembly.

    • Tests control the design, materials and manufacturing process
    • Low runout, which reduces noise and vibration
    • Seals with a reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes that prevent installation damage
    • Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for higher load capacity
    • ABS sensors 100% tested to monitor wheel speed for the anti-lock braking system

    Quick facts

    • Part: Timken HA590243 wheel bearing and hub assembly
    • Fits: 2008-2020 Dodge Grand Caravan and other vehicles
    • Position: Front
    • Condition: New

    A humming or growling noise that changes with speed, looseness at the wheel or an ABS warning light can mean a front wheel bearing is wearing out. These signs alone do not prove the bearing is at fault, since a worn tire can make similar noise.

    Fits

    Listed for a wide range of Chrysler, Dodge, Ram and Volkswagen models, this wheel bearing and hub assembly covers the 2008-2020 Dodge Grand Caravan, the 2008-2016 Chrysler Town & Country and the 2012-2015 Ram C/V. This listing is one unit and these vehicles take two, so order two and fit them together. Open the "Vehicles it fits" section to check your exact model and engine.

    Specifications

    Fit and size

    • Position: Front
    • Quantity per vehicle: 2
    • Bolt circle diameter: 127 mm (5.000 in)
    • Wheel studs: 5
    • Flange bolt holes: 4
    • Flange diameter: 161.74 mm (6.368 in)
    • Flange offset: 48.68 mm (1.917 in)
    • Hub pilot diameter: 85.00 mm (3.346 in)
    • Brake pilot diameter: 72.44 mm (2.852 in)
    • Wheel pilot diameter: 71.41 mm (2.811 in)
    • Spline quantity: 32

    Build and materials

    • Type: hub unit assembly, preset, pre-greased and pre-sealed
    • Drive type: Driven
    • Condition: New

    Interchange: 402.63004
    WE60927 · WE61803 · 513273 · 515136 · 515150 · BR930688 · BR930884

    This part cross-references / interchanges with the following part numbers:

    WE60927, WE61803, 402.63004, 513273, 515136, 515150, BR930688, BR930884

    Frequently Asked Questions

    Is this Timken wheel bearing and hub assembly the right one for the 2008-2020 Dodge Grand Caravan?

    Yes. Timken HA590243 is a front wheel bearing and hub assembly listed for the 2008-2020 Dodge Grand Caravan, and each vehicle takes two.

    What bolt circle and stud count do these Timken front wheel bearings have?

    The bolt circle diameter is 127 mm (5.000 in), with 5 wheel studs. The flange has 4 bolt holes and the unit has 32 splines.

    What are the pilot diameters on these Timken hub bearings?

    Timken HA590243 has an 85.00 mm (3.346 in) hub pilot, a 72.44 mm (2.852 in) brake pilot and a 71.41 mm (2.811 in) wheel pilot.

    How can I tell if my Timken wheel hubs are wearing out?

    A hum or growl that changes with speed, play at the wheel or an ABS warning light can point to a worn bearing. A shop can confirm it with a proper test.

    Does the Timken HA590243 need greasing before it goes on?

    No. Timken HA590243 is supplied preset, pre-greased and pre-sealed, so it needs no greasing before installation.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review