Front Wheel Bearing and Hub Assembly for 2007-2011 Nissan Versa - Timken HA590285

$124.99
Timken Wheel Bearing and Hub Assembly HA590285
Timken Wheel Bearing and Hub Assembly HA590285 - view 2
Timken Wheel Bearing and Hub Assembly HA590285 - view 3
Timken Wheel Bearing and Hub Assembly HA590285 - view 4
Timken Wheel Bearing and Hub Assembly HA590285
Timken Wheel Bearing and Hub Assembly HA590285 - view 2
Timken Wheel Bearing and Hub Assembly HA590285 - view 3
Timken Wheel Bearing and Hub Assembly HA590285 - view 4

Vehicles this part fits
    Part number: HA590285
    UPC: 053893278391
    Condition: New
    Weight: 6.00 LBS
    Item Package Quantity: 1
    $124.99
    Adding to cart… The item has been added

    Have questions?

    Ask an Expert
    Timken Wheel Bearing and Hub Assembly P/N:HA590285
    Timken Wheel Bearing and Hub Assembly P/N:HA590285
    $124.99
    $124.99

    Timken HA590285 front wheel bearing and hub assembly for the 2007-2011 Nissan Versa lets the front wheel spin smoothly on its hub. This Timken wheel bearing is preset, pre-greased and pre-sealed, and OE-developed tests control its design, materials and process.

    • Low runout reduces noise and vibration and helps braking performance
    • Seals with a reinforced outer case, ribbed rubber inner diameter and contamination exclusion system
    • Seal vent holes prevent damage during installation
    • Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for load capacity and bearing life

    Quick facts

    • Part: Timken HA590285 wheel bearing and hub assembly
    • Fits: 2007-2011 Nissan Versa
    • Position: Front
    • Condition: New

    A humming or growling noise that changes with speed, play at the wheel or an ABS warning light can mean the hub bearing is wearing out. Worn tires, a warped brake rotor or loose suspension parts can cause similar noise or vibration, so find the cause before buying. This listing is one hub assembly, and the front wheels are normally replaced together.

    Fits

    It fits the 2007-2011 Nissan Versa.

    Specifications

    Fit and size

    • Position: Front
    • Quantity per vehicle: 2
    • Bolt circle diameter: 114.30 mm (4.500 in)
    • Brake pilot diameter: 68.00 mm (2.677 in)
    • Flange diameter: 136.00 mm (5.354 in)
    • Hub pilot diameter: 80.00 mm (3.150 in)
    • Wheel pilot diameter: 66.00 mm (2.598 in)
    • Flange offset: 40.68 mm (1.602 in)
    • Flange bolt holes: 3
    • Wheel studs: 4
    • Splines: 25

    Build and materials

    • Drive type: Driven
    • ABS sensors: 100% tested to monitor wheel speed for the anti-lock braking system
    • Condition: New

    In the box

    One wheel bearing and hub assembly. The 2007-2011 Nissan Versa takes two.

    Interchange: 051-6319
    513308 · BR930682

    This part cross-references / interchanges with the following part numbers:

    051-6319, 513308, BR930682

    Frequently Asked Questions

    Do Timken front wheel bearings like the HA590285 fit the 2007-2011 Nissan Versa?

    Yes. Timken HA590285 is a front wheel bearing and hub assembly for the 2007-2011 Nissan Versa, and the Versa takes two.

    What are the hub pilot and brake pilot diameters on this Timken wheel bearing and hub assembly?

    The hub pilot is 80.00 mm (3.150 in), the brake pilot is 68.00 mm (2.677 in) and the wheel pilot is 66.00 mm (2.598 in).

    Do Timken hub bearings like this one come pre-greased?

    Yes. The Timken HA590285 hub unit is preset, pre-greased and pre-sealed.

    What studs and bolt circle do Timken wheel hubs like this one have?

    This hub has 4 wheel studs on a 114.30 mm (4.500 in) bolt circle, plus 3 flange bolt holes and 25 splines.

    Can a humming noise from the front wheel mean the hub bearing is worn?

    Yes. A hum or growl that changes with speed, play at the wheel or an ABS warning light can be signs of a worn hub bearing. Have it checked promptly.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review

    Related Products

    !