Rear Wheel Bearing and Hub Assembly for 2010-2013 Kia Forte & More - Timken HA590397

$280.99

Timken Wheel Bearing and Hub Assembly HA590397

Timken Wheel Bearing and Hub Assembly HA590397 - view 2

Timken Wheel Bearing and Hub Assembly HA590397 - view 3

Timken Wheel Bearing and Hub Assembly HA590397 - view 4

Part number: HA590397

UPC: 085706022518

Condition: New

Weight: 7.20 LBS

Item Package Quantity: 1

$280.99

Current Stock: 3

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Timken Wheel Bearing and Hub Assembly P/N:HA590397

$280.99

Description

Timken HA590397 rear wheel bearing and hub assembly for the 2010-2013 Kia Forte and other vehicles holds the rear wheel and lets it turn. Timken wheel hubs are made under OE-developed tests that control the design, materials and manufacturing process.

Preset, pre-greased and pre-sealed hub unit bearing assembly
Low runout reduces noise and vibration
Seals with a reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes that prevent installation damage
Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for load carrying capacity

Quick facts

Part: Timken HA590397 wheel bearing and hub assembly
Fits: 2010-2013 Kia Forte and other vehicles
Position: Rear

A worn bearing can show up as a hum or growl that changes with speed, or as vibration. Tires can make a similar noise, so look over the tire tread for uneven wear with the engine off before you replace anything. Rear bearings are normally replaced together on both sides, and this listing is one.

Fits

It fits the 2010-2013 Kia Forte and the 2010-2013 Kia Forte Koup.

Specifications

Fit and size

Position: Rear
Quantity per vehicle: 2
Bolt circle diameter: 114.30 mm (4.500 in)
Wheel studs: 5
Flange bolt holes: 4
Flange diameter: 139.00 mm (5.470 in)
Flange offset: 59.00 mm (2.320 in)
Brake pilot diameter: 76.00 mm (2.990 in)
Hub pilot diameter: 69.00 mm (2.717 in)
Wheel pilot diameter: 67.00 mm (2.638 in)

Build and materials

Type: hub unit bearing assembly, preset, pre-greased and pre-sealed
Drive type: Non-driven
ABS sensor: 100% tested to monitor wheel speed for the anti-lock braking system

In the box

This listing is one wheel bearing and hub assembly; the rear of these vehicles takes two.

Interchange: WE60977 · 512436 · BR930835

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

WE60977, 512436, BR930835

Buyer's Q&A

Frequently Asked Questions

Do these 2010-2013 Kia Forte wheel bearings also fit the 2010-2013 Kia Forte Koup?

Yes. Timken HA590397 is a rear wheel bearing and hub assembly that fits both the 2010-2013 Kia Forte and the 2010-2013 Kia Forte Koup.

How can I tell if a Timken wheel bearing at the rear is wearing out?

A hum or growl that changes with speed, or vibration, can mean a worn wheel bearing. Checking play needs the wheel lifted, so a shop can test it.

What are the bolt circle and pilot sizes on these Timken hub bearings?

Timken HA590397 has a 114.30 mm (4.500 in) bolt circle, 5 wheel studs, a 76.00 mm (2.990 in) brake pilot, a 69.00 mm (2.717 in) hub pilot and a 67.00 mm (2.638 in) wheel pilot.

Is the Timken wheel bearing and hub assembly preset and pre-greased?

Yes. Timken HA590397 is a preset, pre-greased and pre-sealed hub unit bearing assembly, and its seals have vent holes that prevent installation damage.

Is this rear wheel bearing and hub assembly driven or non-driven?

It is non-driven. Timken HA590397 is a rear wheel bearing and hub assembly with a 59.00 mm (2.320 in) flange offset.