Front Wheel Bearing and Hub Assembly for 2011-2016 Ford F-450 Super Duty & More - Timken HA590438

$506.99

Timken Wheel Bearing and Hub Assembly HA590438

Timken Wheel Bearing and Hub Assembly HA590438 - view 2

Timken Wheel Bearing and Hub Assembly HA590438 - view 3

Timken Wheel Bearing and Hub Assembly HA590438 - view 4

Part number: HA590438

UPC: 085706026004

Condition: New

Weight: 23.70 LBS

Item Package Quantity: 1

$506.99

Current Stock: 22

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Timken Wheel Bearing and Hub Assembly P/N:HA590438

$506.99

Description

Timken HA590438 front wheel bearing and hub assembly for the 2011-2016 Ford F-450 Super Duty and other vehicles lets the front wheel turn freely.

Hub bearing design, materials and manufacturing process controlled through tests for consistent performance
Low runout reduces noise and vibration and helps braking performance
Seals with a reinforced outer case, ribbed rubber inner diameter and a contamination exclusion system
Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for higher load carrying capacity
100% tested ABS sensors monitor wheel speed for the anti-lock braking system

Quick facts

Part: Timken HA590438 wheel bearing and hub assembly
Fits: 2011-2016 Ford F-450 Super Duty and other vehicles
Position: Front
Condition: New

A hum that rises with speed or an ABS warning light can mean a front wheel bearing is wearing out. Before you replace this hub, rule out a worn tire, a loose wheel or a brake problem, since any of them can bring on noise and vibration of their own.

Fits

It is a direct-fit replacement for the 2011-2016 Ford F-450 Super Duty and the 2011-2016 Ford F-550 Super Duty. These trucks take two Timken wheel hubs, one for each front wheel; this listing is one piece, and both sides are normally replaced together.

Specifications

Fit and size

Position: Front
Quantity per vehicle: 2
Bolt circle diameter: 170.10 mm (6.697 in), 4 flange bolt holes
Flange diameter: 203.10 mm (7.996 in)
Flange offset: 46.10 mm (1.815 in)
Brake pilot diameter: 128.85 mm (5.073 in)
Hub pilot diameter: 139.98 mm (5.511 in)
Wheel pilot diameter: 124.92 mm (4.918 in)
Wheel studs: 10

Build and materials

Type: hub unit bearing assembly
Drive type: Non-driven
Condition: New

Installation notes

Arrives preset, pre-greased and pre-sealed.
The seals have vent holes to prevent installation damage.

Interchange: WE60627 · 515132 · BR930804

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

WE60627, 515132, BR930804

Buyer's Q&A

Frequently Asked Questions

Do these Timken front wheel bearings fit the 2011-2016 Ford F-450 Super Duty?

Yes. Timken HA590438 fits the 2011-2016 Ford F-450 Super Duty and the 2011-2016 Ford F-550 Super Duty, with two per truck, one for each front wheel.

What are the bolt circle and pilot sizes of this Timken wheel bearing and hub assembly?

Timken HA590438 has a 170.10 mm bolt circle with 4 flange bolt holes and 10 wheel studs. The brake pilot is 128.85 mm, the hub pilot 139.98 mm and the wheel pilot 124.92 mm.

Does the Timken wheel bearing need greasing before it goes on?

No. This hub unit comes preset, pre-greased and pre-sealed, so the bearing is ready to install as supplied.

Can a growl or vibration mean my Timken hub bearings are wearing out?

Yes, it can. Growling, vibration or an ABS warning light can come from a worn hub bearing. Have it checked promptly rather than driving on it.

Is 515132 the same hub as Timken HA590438?

Yes. 515132 is one of the other numbers Timken HA590438 replaces, so you can use it to cross-check against an older part.