Rear Wheel Bearing and Hub Assembly for 2016-2020 Toyota Mirai & More - Timken HA590464

$399.99

Timken Wheel Bearing and Hub Assembly HA590464

Timken Wheel Bearing and Hub Assembly HA590464 - view 2

Timken Wheel Bearing and Hub Assembly HA590464 - view 3

Timken Wheel Bearing and Hub Assembly HA590464 - view 4

Part number: HA590464

UPC: 085706028107

Condition: New

Weight: 7.40 LBS

Item Package Quantity: 1

$399.99

Current Stock: 12

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Timken Wheel Bearing and Hub Assembly P/N:HA590464

$399.99

Description

Timken HA590464 rear wheel bearing and hub assembly for the 2016-2020 Toyota Mirai and other vehicles carries the wheel and lets it spin freely. This Timken wheel bearing combines the hub and bearing in one unit for the rear wheel.

Preset, pre-greased and pre-sealed hub unit
Low runout to reduce noise and vibration
Seals with a reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes against installation damage
Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for load capacity and bearing life

Quick facts

Part: Timken HA590464 wheel bearing and hub assembly
Fits: 2016-2020 Toyota Mirai and other vehicles
Position: Rear
Condition: New

A humming or growling noise that changes with speed, or play in the rear wheel, can mean a bearing is worn. Before you replace this assembly, rule out uneven tire wear and brake problems, which can produce a similar noise or vibration. Rear hub assemblies are normally changed as a pair, so plan on two; this listing is a single unit, and the car takes one on each side of the rear axle.

Fits

It fits the 2016-2020 Toyota Mirai and the 2012-2017 Toyota Prius v.

Specifications

Fit and size

Position: rear
Quantity per vehicle: 2
Bolt circle diameter: 114.30 mm (4.500 in)
Wheel studs: 5
Flange bolt holes: 4
Flange diameter: 152.00 mm (5.984 in)
Flange offset: 64.00 mm (2.520 in)
Hub pilot diameter: 73.90 mm (2.909 in)
Brake pilot diameter: 62.00 mm (2.440 in)
Wheel pilot diameter: 60.00 mm (2.362 in)

Build and materials

Drive type: non-driven
ABS sensors: 100% tested to monitor wheel speed for the anti-lock braking system
Condition: new

Interchange: WE61837 · 512509 · BR930961

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

WE61837, 512509, BR930961

Buyer's Q&A

Frequently Asked Questions

Does the Timken wheel bearing and hub assembly HA590464 fit the 2012-2017 Toyota Prius v?

Yes. Timken HA590464 is a rear hub unit that fits the 2012-2017 Toyota Prius v as well as the 2016-2020 Toyota Mirai.

How are these Timken hub bearings sized for the wheel?

Timken HA590464 has a 114.30 mm (4.500 in) bolt circle, five wheel studs and a 60.00 mm (2.362 in) wheel pilot.

Are Timken wheel hubs like this one already greased and sealed?

Yes. This rear hub unit comes preset, pre-greased and pre-sealed.

What noises can a worn Timken wheel bearing assembly make?

A humming or growling that changes with speed, play at the rear wheel or an ABS warning light can point to a worn bearing, though other causes are possible. Have a shop inspect it promptly.

Does Timken HA590464 replace number 512509?

Yes. 512509 is listed as an interchange for Timken HA590464, along with WE61837 and BR930961.