Timken HA590466 front wheel bearing and hub assembly for the 2012 Ram 1500 and other vehicles connects the front wheel to the axle and lets it spin.
- Preset, pre-greased and pre-sealed construction
- Low runout reduces noise and vibration, which helps braking performance
- Seals with a reinforced outer case, ribbed rubber inner diameter and contamination exclusion system; vent holes prevent installation damage
- Bearings with precision profiles, uniform internal geometry and enhanced surface finishes to raise load capacity and extend bearing life
Quick facts
- Part: Timken HA590466 wheel bearing and hub assembly
- Fits: 2012 Ram 1500 and other vehicles
- Position: Front
- Condition: New
A hum or growl that changes with speed, vibration, or play in the wheel can mean a worn wheel bearing. Before you replace the wheel bearing and hub assembly, rule out tire wear, an out-of-balance wheel and brake drag, which can cause similar noise or vibration.
Fits
This front wheel bearing and hub assembly fits the 2012 Ram 1500, the 2012-2013 Ram 2500 and the 2012-2014 Ram 3500, with one on each side of the front axle. This listing is one unit, and the other side of that axle is normally done at the same time.
Specifications
Fit and size
- Position: front
- Quantity per vehicle: 2
- Bolt circle: 165.10 mm (6.500 in), 4 flange bolt holes
- Flange diameter: 205.00 mm (8.071 in)
- Flange offset: 56.30 mm (2.216 in)
- Hub pilot diameter: 199.90 mm (7.870 in)
- Brake pilot diameter: 123.00 mm (4.843 in)
- Wheel pilot diameter: 121.00 mm (4.764 in)
Build and materials
- Construction: preset, pre-greased and pre-sealed
- ABS sensor: 100% tested to monitor wheel speed for the anti-lock braking system
- Condition: new
Interchange: 515154 · BR930552
Frequently Asked Questions
Is the Timken HA590466 a wheel bearing for the 2012 Ram 1500?
Yes. Timken HA590466 is a front wheel bearing and hub assembly for the 2012 Ram 1500, with one needed on each side of the front axle.
Will the Timken HA590466 work as a wheel bearing for the 2012-2013 Ram 2500?
Yes. Timken HA590466 fits the 2012-2013 Ram 2500 as a front wheel bearing and hub assembly. This listing is one unit, and the other side of the axle needs its own.
Is this Timken wheel bearing preset, pre-greased and pre-sealed?
Yes. This wheel bearing and hub assembly comes preset, pre-greased and pre-sealed, and its seals have a reinforced outer case and a ribbed rubber inner diameter.
How are Timken wheel hubs like the HA590466 tested?
The design, materials and manufacturing process of these hub bearing assemblies are controlled with OE-developed tests.
Does the Timken bearing and hub assembly HA590466 replace 515154?
Yes. Timken HA590466 is a listed replacement for number 515154.
