Timken HA590560 rear wheel bearing and hub assembly for the 2013-2020 Nissan Pathfinder and other vehicles lets the rear wheel turn on its bearing. As a Timken wheel bearing, it is made under OE-developed tests that control the design, materials and process.
- Preset, pre-greased and pre-sealed hub unit bearing assembly
- Low runout to reduce noise and vibration and improve braking performance
- Seals with a reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes that prevent installation damage
- Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for load carrying capacity and bearing life
Quick facts
- Part: Timken HA590560 wheel bearing and hub assembly
- Fits: 2013-2020 Nissan Pathfinder and other vehicles
- Position: Rear
- Condition: New
Worn tires, a brake problem or a loose suspension part can be behind a humming noise or vibration too, so find the cause before replacing the assembly. If the bearing is the cause, signs can include a hum or growl that changes with speed, vibration or play at the wheel.
Fits
The 2013-2020 Nissan Pathfinder, the 2009-2023 Nissan Murano and the 2014-2020 Infiniti QX60 all take it, along with other vehicles. If your vehicle isn't named here, look up your year and model in the "Vehicles it fits" section. The 2013-2020 Nissan Pathfinder takes two; this listing is one rear wheel bearing and hub assembly, and the other side of that axle is normally done at the same time.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 2
- Bolt circle diameter: 114.30 mm (4.500 in), 5 wheel studs
- Flange bolt holes: 4
- Flange diameter: 147.88 mm (5.822 in)
- Flange offset: 69.24 mm (2.726 in)
- Brake pilot diameter: 67.87 mm (2.672 in)
- Hub pilot diameter: 83.95 mm (3.305 in)
- Wheel pilot diameter: 65.86 mm (2.593 in)
- Spline quantity: 29
Build and materials
- Construction: hub unit assembly, preset, pre-greased and pre-sealed
- Drive type: Driven
- ABS sensor: 100% tested to monitor wheel speed for the anti-lock braking system
- Condition: New
Interchange: WE61036 · WE61773 · 512363 · 512408 · 512548 · BR930477 · BR930735 · BR930868
This part cross-references / interchanges with the following part numbers:
WE61036, WE61773, 512363, 512408, 512548, BR930477, BR930735, BR930868
Frequently Asked Questions
Can I use the Timken HA590560 as the wheel bearing on a 2009-2023 Nissan Murano?
Yes. Timken HA590560 is a rear wheel bearing and hub assembly for the 2009-2023 Nissan Murano and the 2013-2020 Nissan Pathfinder. For another vehicle, see the "Vehicles it fits" section.
What bolt pattern do Timken wheel hubs like the HA590560 have?
This assembly has 5 wheel studs on a 114.30 mm (4.500 in) bolt circle and 4 flange bolt holes. Its hub pilot diameter is 83.95 mm (3.305 in).
Does the Timken wheel bearing and hub assembly HA590560 need to be greased or preset?
No. This Timken HA590560 assembly is supplied preset, pre-greased and pre-sealed.
How can I tell if Timken hub bearings on the rear wheels are wearing out?
A hum or growl that changes with speed, vibration or play at the wheel can point to a worn bearing. A shop can inspect the rear assembly and confirm it.
Does Timken HA590560 replace the 512363 number?
Yes. 512363 is one of the numbers Timken HA590560 replaces, along with 512408, 512548 and WE61036, among others on the Interchange line.
