Timken HA590564 rear wheel bearing and hub assembly for the 2008-2020 Nissan Rogue and other vehicles lets the rear wheel turn on the axle. The hub unit comes preset, pre-greased and pre-sealed.
- Tests control the design, materials and manufacturing process of these hub bearing assemblies
- Low runout to reduce noise and vibration
- Seals with a reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes that prevent installation damage
- Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for more load capacity and longer bearing life
- ABS sensors 100% tested to monitor wheel speed for anti-lock braking systems
Quick facts
- Part: Timken HA590564 wheel bearing and hub assembly
- Fits: 2008-2020 Nissan Rogue and other vehicles
- Position: Rear
- Condition: New
A humming or growling noise that changes with road speed, vibration, or play at the wheel can mean the bearing is wearing out. Worn or unevenly wearing tires, brake trouble and a loose wheel can bring on similar noise or vibration, so pin down the source before you buy a hub.
Fits
This hub unit fits the 2008-2020 Nissan Rogue and the 2011-2017 Nissan Juke. This listing is one hub unit; the other side of that axle is normally done at the same time.
Specifications
Fit and size
- Position: rear
- Quantity per vehicle: 2
- Bolt circle diameter: 114.30 mm (4.500 in)
- Wheel studs: 5
- Flange bolt holes: 4
- Flange diameter: 147.73 mm (5.816 in)
- Flange offset: 69.00 mm (2.717 in)
- Hub pilot diameter: 84.00 mm (3.307 in)
- Wheel pilot diameter: 66.00 mm (2.598 in)
- Brake pilot diameter: 67.95 mm (2.677 in)
- Spline quantity: 25
Build and materials
- Drive type: driven
- Condition: new
In the box
One rear wheel bearing and hub assembly. These vehicles take two at the rear, one per side.
Interchange: 051-6330
WE60476 · 512373 · BR930732
This part cross-references / interchanges with the following part numbers:
WE60476, 051-6330, 512373, BR930732
Frequently Asked Questions
Are these 2008-2020 Nissan Rogue wheel bearings for the rear or the front?
Rear. The Timken HA590564 is a rear wheel bearing and hub assembly for the 2008-2020 Nissan Rogue, and the 2011-2017 Nissan Juke takes it too.
Do Timken wheel hubs like this one need greasing before they go on?
No. This Timken HA590564 hub unit comes preset, pre-greased and pre-sealed.
What bolt circle and stud count does this Timken bearing and hub assembly have?
This Timken HA590564 hub unit has 5 wheel studs on a 114.30 mm (4.500 in) bolt circle, with an 84.00 mm (3.307 in) hub pilot diameter and a 66.00 mm (2.598 in) wheel pilot diameter.
What does a failing Timken wheel bearing assembly sound like?
A hum or growl that changes with road speed, or vibration felt in the cabin, can be a sign of a worn rear wheel bearing. A shop can confirm it.
Is this Timken wheel bearing sold singly or as a pair?
Sold singly: this listing is one rear hub unit. The vehicle takes two at the rear, one per side.
