Rear Wheel Bearing and Hub Assembly for 2012-2020 Nissan Rogue & More - Timken HA590565

$235.99

Timken Wheel Bearing and Hub Assembly HA590565

Timken Wheel Bearing and Hub Assembly HA590565 - view 2

Timken Wheel Bearing and Hub Assembly HA590565 - view 3

Timken Wheel Bearing and Hub Assembly HA590565 - view 4

Part number: HA590565

UPC: 085706041090

Condition: New

Weight: 8.30 LBS

Item Package Quantity: 1

$235.99

Current Stock: 8

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Timken Wheel Bearing and Hub Assembly P/N:HA590565

$235.99

Description

Timken HA590565 rear wheel bearing and hub assembly for the 2012-2020 Nissan Rogue and other vehicles mounts the wheel and lets it turn on a bearing. It also fits the 2017-2022 Nissan Rogue Sport.

Preset, pre-greased and pre-sealed hub unit bearing assembly
Low runout reduces noise and vibration, which helps braking performance
Seals have a reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes to prevent installation damage
Precision-profile bearings with uniform internal geometry and enhanced surface finishes for higher load carrying capacity and longer bearing life
ABS sensors are 100% tested to monitor wheel speed for the anti-lock braking system

Quick facts

Part: Timken HA590565 wheel bearing and hub assembly
Fits: 2012-2020 Nissan Rogue and other vehicles
Position: Rear
Condition: New

A hum or growl that rises with speed, vibration, or play at the wheel can mean this bearing is worn, though an unevenly worn tire or a warped brake rotor can be behind those signs too, so find the cause first.

Fits

It fits the 2012-2020 Nissan Rogue and the 2017-2022 Nissan Rogue Sport, with one unit on each side of the rear axle. This listing is a single hub; the other side of that axle is normally done at the same time.

Specifications

Fit and size

Position: Rear
Quantity per vehicle: 2, one on each side of the rear axle
Drive type: Non-driven
Bolt circle diameter: 114.30 mm (4.500 in)
Flange bolt holes: 4
Wheel studs: 5
Flange diameter: 147.80 mm (5.819 in)
Flange offset: 68.96 mm (2.715 in)
Hub pilot diameter: 83.92 mm (3.304 in)
Wheel pilot diameter: 65.86 mm (2.593 in)
Brake pilot diameter: 67.92 mm (2.674 in)

Build and materials

Type: Preset, pre-greased and pre-sealed hub unit assembly
Condition: New

Interchange: WE61795 · 512534 · BR930970

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

WE61795, 512534, BR930970

Buyer's Q&A

Frequently Asked Questions

Are these wheel bearings made for the 2012-2020 Nissan Rogue?

Yes. Timken HA590565 is a rear wheel bearing and hub assembly for the 2012-2020 Nissan Rogue, and it also fits the 2017-2022 Nissan Rogue Sport.

What are the bolt circle and pilot sizes of these Timken wheel hubs?

The bolt circle is 114.30 mm (4.500 in), with 4 flange bolt holes and 5 wheel studs. The wheel pilot is 65.86 mm (2.593 in) and the hub pilot is 83.92 mm (3.304 in).

Is this Timken wheel bearing preset and pre-greased?

Yes. Timken HA590565 is a preset, pre-greased and pre-sealed hub unit bearing assembly.

What signs can mean Timken hub bearings are worn?

A hum or growl that rises with speed, vibration, or looseness at the wheel can mean a worn bearing. A worn wheel bearing is a safety concern, so have it checked or replaced promptly rather than driving on it.

Is this Timken wheel bearing assembly for a driven axle?

No. This rear hub is a non-driven unit, with a 147.80 mm (5.819 in) flange diameter and a 68.96 mm (2.715 in) flange offset.