Front Left Wheel Bearing and Hub Assembly for 1997-2004 Dodge Dakota & More - Timken SP450101

$285.99

Vehicles this part fits

    Part number: SP450101
    UPC: 053893893143
    Condition: New
    Weight: 11.30 LBS
    Item Package Quantity: 1
    $285.99
    Adding to cart… The item has been added

    Have questions?

    Timken Wheel Bearing and Hub Assembly P/N:SP450101
    Timken Wheel Bearing and Hub Assembly P/N:SP450101
    $285.99
    $285.99

    Timken SP450101 front left wheel bearing and hub assembly for the 1997-2004 Dodge Dakota and other vehicles lets the wheel turn freely on the axle. The assembly is preset, pre-greased and pre-sealed, and OE-developed tests control its design, materials and process.

    • Low runout to reduce noise and vibration and improve braking performance
    • Seal with a reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes against installation damage
    • Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for higher load capacity and longer bearing life
    • ABS sensors are 100% tested to monitor wheel speed for the anti-lock braking system

    Quick facts

    • Part: Timken SP450101 wheel bearing and hub assembly
    • Fits: 1997-2004 Dodge Dakota and other vehicles
    • Position: Front left
    • Condition: New

    A worn wheel bearing and hub assembly can show up as a humming or growling noise that changes with road speed, vibration or an ABS warning light. Tires, worn brake parts or a faulty wheel speed sensor can be behind these signs too, so find the cause before you buy. This listing is one piece, and both front sides are normally replaced together.

    Fits

    This front left wheel bearing and hub assembly fits the 1997-2004 Dodge Dakota and the 1998-2003 Dodge Durango.

    Specifications

    Fit and size

    • Position: Front left
    • Sold individually: 1 per listing
    • Bolt circle diameter: 114.30 mm (4.500 in)
    • Flange bolt holes: 3
    • Wheel studs: 6
    • Flange diameter: 160.27 mm (6.310 in)
    • Flange offset: 53.49 mm (2.106 in)
    • Hub pilot diameter: 88.90 mm (3.500 in)
    • Brake pilot diameter: 73.41 mm (2.890 in)
    • Wheel pilot diameter: 71.37 mm (2.810 in)
    • Spline quantity: 31

    Build and materials

    • Drive type: Driven
    • Condition: New

    In the box

    One front left wheel bearing and hub assembly. The front left takes one; the front right is a separate part.

    Interchange: WE61137 · 515008 · BR930204

    This part cross-references / interchanges with the following part numbers:

    WE61137, 515008, BR930204

    Frequently Asked Questions

    Is this Timken wheel bearing right for the 1998-2003 Dodge Durango?

    Yes. Timken SP450101 is a front left wheel bearing and hub assembly that fits the 1998-2003 Dodge Durango and the 1997-2004 Dodge Dakota.

    Do Timken wheel hubs like this one come pre-greased?

    Yes. This wheel bearing and hub assembly is preset, pre-greased and pre-sealed.

    How many wheel studs does the Timken front wheel bearing SP450101 have?

    Timken SP450101 has 6 wheel studs, 3 flange bolt holes, a 114.30 mm (4.500 in) bolt circle and 31 splines.

    What noises can a worn Timken wheel bearing and hub assembly make?

    A humming or growling noise that changes with speed, vibration or an ABS warning light can mean a worn bearing. A shop can confirm the cause.

    Which cross-reference numbers apply to Timken hub bearings like SP450101?

    Timken SP450101 is listed against the interchange numbers WE61137, 515008 and BR930204.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review