Front Wheel Bearing and Hub Assembly for 2003-2005 Dodge Ram 2500 & More - Timken SP550103

$450.99

Timken Wheel Bearing and Hub Assembly SP550103

Timken Wheel Bearing and Hub Assembly SP550103 - view 2

Timken Wheel Bearing and Hub Assembly SP550103 - view 3

Timken Wheel Bearing and Hub Assembly SP550103 - view 4

Part number: SP550103

UPC: 053893899725

Condition: New

Weight: 19.40 LBS

Item Package Quantity: 1

$450.99

Current Stock: 24

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Timken Wheel Bearing and Hub Assembly P/N:SP550103

$450.99

Description

Timken SP550103 front wheel bearing and hub assembly for the 2003-2005 Dodge Ram 2500 and other vehicles supports the front wheel and lets it turn. This Timken wheel bearing is a hub unit that arrives preset, pre-greased and pre-sealed.

Low runout to reduce noise and vibration
Seals with a reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes to prevent installation damage
Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for higher load carrying capacity and longer bearing life
ABS sensors 100% tested to monitor wheel speed for the anti-lock braking system

Quick facts

Part: Timken SP550103 wheel bearing and hub assembly
Fits: 2003-2005 Dodge Ram 2500 and other vehicles
Position: Front
Condition: New

A hum or growl that changes with speed, vibration, or an ABS warning light can mean a worn bearing. Tires and other parts can cause similar signs, so look over the tires for uneven wear with the engine off before replacing the hub. This listing is one assembly; the 2003-2005 Dodge Ram 2500 takes two, so order two and fit them together.

Fits

The same assembly fits the 2003-2005 Dodge Ram 3500 and the 2005-2006 Dodge Ram 4000.

Specifications

Fit and size

Position: front
Drive type: non-driven
Quantity per vehicle: 2
Bolt circle: 165.1 mm (6.5 in)
Wheel studs: 8
Flange bolt holes: 3
Flange diameter: 205.5 mm (8.091 in)
Flange offset: 50.18 mm (1.976 in)
Brake pilot diameter: 122.28 mm (4.814 in)
Hub pilot diameter: 99.34 mm (3.911 in)
Wheel pilot diameter: 121.08 mm (4.767 in)

Build and materials

Type: hub unit, preset, pre-greased and pre-sealed
Condition: new

Interchange: WE61572 · 515089 · BR930475

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

WE61572, 515089, BR930475

Buyer's Q&A

Frequently Asked Questions

Is SP550103 the right wheel bearing for the 2003-2005 Dodge Ram 2500?

Yes. Timken SP550103 is a front, non-driven wheel bearing and hub assembly for the 2003-2005 Dodge Ram 2500, and that truck takes two.

What are the bolt circle and stud count on these Timken wheel hubs?

The bolt circle is 165.1 mm (6.5 in), with 8 wheel studs and 3 flange bolt holes. The hub pilot is 99.34 mm and the wheel pilot is 121.08 mm.

What are the signs of worn Timken front wheel bearings?

A hum or growl that changes with speed, vibration or an ABS warning light can mean a worn bearing, though tires and other parts can cause similar signs. A shop can test play safely.

Is the Timken wheel bearing and hub assembly pre-greased?

Yes. Timken SP550103 is a hub unit that comes preset, pre-greased and pre-sealed.

What does the low runout on this Timken SP550103 hub do?

Low runout reduces noise and vibration and improves braking performance on this hub assembly.