Front Wheel Bearing and Hub Assembly for 2004-2005 Ford F-150 - Timken SP550212

$342.99

Timken Wheel Bearing and Hub Assembly SP550212

Timken Wheel Bearing and Hub Assembly SP550212 - view 2

Timken Wheel Bearing and Hub Assembly SP550212 - view 3

Timken Wheel Bearing and Hub Assembly SP550212 - view 4

Part number: SP550212

UPC: 053893051925

Condition: New

Weight: 15.40 LBS

Item Package Quantity: 1

$342.99

Current Stock: 47

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Timken Wheel Bearing and Hub Assembly P/N:SP550212

$342.99

Description

Timken SP550212 front wheel bearing and hub assembly for the 2004-2005 Ford F-150 carries the front wheel and lets it turn on the axle. This Timken wheel bearing comes preset, pre-greased and pre-sealed.

Tests control the design, materials and process used to manufacture each hub bearing assembly
Low runout reduces noise and vibration
Seals with a reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes to prevent installation damage
Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for load carrying capacity
ABS sensors are 100% tested to monitor wheel speed for anti-lock braking systems

Quick facts

Part: Timken SP550212 wheel bearing and hub assembly
Fits: 2004-2005 Ford F-150
Position: Front
Condition: New

A humming or growling noise that changes with speed, play at the wheel or an ABS warning light can mean the hub bearing is worn. These signs alone do not prove the hub is the cause, since an unevenly worn tire can make a similar noise. This listing is one hub assembly, and both front sides are normally replaced together.

Fits

This hub assembly fits the 2004-2005 Ford F-150, which takes two, one on each side of the front axle.

Specifications

Fit and size

Position: Front
Quantity per vehicle: 2
Bolt circle diameter: 135 mm (5.315 in)
Flange diameter: 183 mm (7.205 in)
Flange offset: 46 mm (1.811 in)
Brake pilot diameter: 90.26 mm (3.554 in)
Hub pilot diameter: 99.34 mm (3.911 in)
Wheel pilot diameter: 86.80 mm (3.417 in)
Wheel studs: 6
Flange bolt holes: 4
Splines: 45

Build and materials

Construction: preset, pre-greased and pre-sealed hub unit
Drive type: Driven
Condition: New

Interchange: WE61068 · 515046 · BR930455 · FW746

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

WE61068, 515046, BR930455, FW746

Buyer's Q&A

Frequently Asked Questions

Are these the right wheel bearings for the 2004-2005 Ford F-150?

Yes. Timken SP550212 fits the front axle of the 2004-2005 Ford F-150, and the truck takes two, one per side.

Are Timken wheel hubs like this one already greased and sealed?

Yes. This Timken hub assembly comes preset, pre-greased and pre-sealed, and its seals have vent holes to prevent installation damage.

What are the pilot sizes on these Timken front wheel bearings?

Timken SP550212 has a 90.26 mm brake pilot, a 99.34 mm hub pilot and an 86.80 mm wheel pilot, on a 135 mm bolt circle.

How can I tell if a Timken wheel bearing and hub assembly is wearing out?

A humming or growling noise that changes with speed, looseness at the wheel or an ABS warning light can be signs. A shop can test the bearing for you.

How many wheel studs and splines does this hub have?

Timken SP550212 has 6 wheel studs, 45 splines and 4 flange bolt holes.