Front Wheel Bearing and Hub Assembly for 2009 GMC Yukon & More - Timken SP580312

$279.99

Timken Wheel Bearing and Hub Assembly SP580312

Timken Wheel Bearing and Hub Assembly SP580312 - view 2

Timken Wheel Bearing and Hub Assembly SP580312 - view 3

Timken Wheel Bearing and Hub Assembly SP580312 - view 4

Part number: SP580312

UPC: 053893719603

Condition: New

Weight: 16.90 LBS

Item Package Quantity: 1

$279.99

Current Stock: 39

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Timken Wheel Bearing and Hub Assembly P/N:SP580312

$279.99

Description

Timken SP580312 front wheel bearing and hub assembly for the 2009 GMC Yukon and other vehicles connects the wheel to the axle and lets it spin freely. This Timken wheel bearing is meant to give a smoother ride.

Hub unit bearing assembly that is preset, pre-greased and pre-sealed
Low runout to reduce noise and vibration
Seals with a reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes
Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for load carrying capacity
ABS sensors 100% tested to monitor wheel speed for anti-lock braking systems

Quick facts

Part: Timken SP580312 wheel bearing and hub assembly
Fits: 2009 GMC Yukon and other vehicles
Position: Front

A hum or growl that changes with speed, looseness at the wheel or an ABS warning light can mean this wheel bearing and hub assembly is worn, though a worn tire or a brake rotor can be behind the same signs.

Fits

This front wheel bearing and hub assembly is listed for a wide range of Chevrolet, GMC and Hummer models, including the 2007-2013 Chevrolet Suburban 2500 and the 2007-2013 GMC Yukon XL 2500. This listing is one assembly; the other side of that axle is normally done at the same time.

Specifications

Fit and size

Position: Front
Quantity per vehicle: 2
Bolt circle diameter: 165.10 mm (6.500 in)
Wheel studs: 8
Flange bolt holes: 4
Flange diameter: 199.30 mm (7.846 in)
Flange offset: 58.35 mm (2.297 in)
Brake pilot diameter: 117.89 mm (4.640 in)
Hub pilot diameter: 105.84 mm (4.167 in)
Wheel pilot diameter: 116.69 mm (4.594 in)
Spline quantity: 33

Build and materials

Type: hub unit assembly, preset, pre-greased and pre-sealed
Drive type: Driven

In the box

One wheel bearing and hub assembly. The front axle of these vehicles takes two.

Interchange: 402.66017
WE61417 · 515098 · BR930662

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

WE61417, 402.66017, 515098, BR930662

Buyer's Q&A

Frequently Asked Questions

Is this one of the Timken front wheel bearings made for the 2007-2013 Chevrolet Suburban 2500?

Yes. Timken SP580312 is a front wheel bearing and hub assembly listed for the 2007-2013 Chevrolet Suburban 2500. For any other vehicle, look it up in the "Vehicles it fits" section.

What are the bolt circle and pilot sizes on these Timken wheel hubs?

For Timken SP580312 the bolt circle is 165.10 mm (6.500 in) with 8 wheel studs. The brake pilot is 117.89 mm, the hub pilot 105.84 mm and the wheel pilot 116.69 mm.

Are the ABS sensors on Timken hub bearings tested?

Yes. Every ABS sensor is tested, and its job is to monitor wheel speed for the anti-lock braking system.

How can I tell when a front wheel bearing and hub assembly is wearing out?

A hum or growl that changes with speed, looseness at the wheel or an ABS warning light can mean wear. Have a suspect wheel bearing and hub assembly checked or replaced promptly rather than driving on it.

Does the Timken wheel bearing and hub assembly come pre-greased?

Yes. Timken SP580312 is preset, pre-greased and pre-sealed, and its seals have vent holes to prevent installation damage.