TrakMotive AD-8112 front right CV axle shaft for the 2005-2009 Audi A4 Quattro and other vehicles carries drive torque to the front right wheel. Its two joints let the wheel keep turning as the suspension moves and the front wheel steers.
- Flange-type inboard shaft connection
- Spline-bolt outboard joint with 38 outboard splines
- Neoprene boots on the inboard and outboard joints
- Window-type ABS tone ring with 45 teeth is included
Quick facts
- Part: TrakMotive AD-8112 CV axle shaft
- Fits: 2005-2009 Audi A4 Quattro and other vehicles
- Position: Front right
- Condition: New
A torn boot with grease thrown around the wheel, clicking when turning, or vibration under acceleration can mean the axle is worn. These signs alone do not prove the axle is at fault, since a worn wheel bearing can make a similar noise.
Fits
This front right CV axle shaft is a direct-fit replacement across a wide range of Audi models, and the 2000-2004 Audi A6 Quattro and the 2003-2004 Audi RS6 are two of the most popular. The ABS-equipped axle also suits non-ABS applications unless otherwise noted. This listing is one shaft for the front right side, which takes a single axle; the front left is a separate part and is normally replaced on the same axle at the same time.
Specifications
Fit and size
- Position: Front right
- Quantity per application: 1
- Overall compressed length: 479 mm (18.86 in)
- Axle bolt thread size: M16x1.5
- Axle bolt hex size: 27 mm
- Axle bolt length: 97 mm
- Outboard splines: 38
Build and materials
- Inboard joint type: Flange
- Outboard joint type: Audi style spline bolt
- Joint boots: Neoprene, inboard and outboard
- ABS tone ring: included, window type, 45 teeth
- Condition: New
- Warranty: TrakMotive limited lifetime warranty
- Country of origin: China
In the box
One front right CV axle shaft. The axle nut is not included, so plan on a new one rather than reusing the old.
Interchange: 80-5189 · 60-7384 · VW-2252A · 80-9086 · AD-8-8596A · MX-17242S · AX-90429
652778 · 109112 · 305082 · NCV23623 · 77104 · 77902 · 40704040 · 4B3407272C · 4B3407272H · 4B3407452AX · AD10546
This part cross-references / interchanges with the following part numbers:
652778, 80-5189, 109112, 60-7384, VW-2252A, 80-9086, 305082, NCV23623, 77104, 77902, 40704040, AD-8-8596A, 4B3407272C, 4B3407272H, 4B3407452AX, AD10546, AD-8112, MX-17242S, AX-90429
Frequently Asked Questions
Will the TrakMotive AD-8112 axle fit a 2005-2009 Audi A4 Quattro?
Yes, TrakMotive AD-8112 is a front right axle shaft for the 2005-2009 Audi A4 Quattro. If your Audi is not named here, look it up in the "Vehicles it fits" section.
Does the TrakMotive CV axle come with an axle nut?
No. The axle nut is not included, so plan on a new nut rather than reusing the old one. This listing is the front right CV axle shaft only.
Does the TrakMotive AD-8112 axle include the ABS tone ring?
Yes. TrakMotive AD-8112 includes a window-type ABS tone ring with 45 teeth, so the ring does not need to be ordered separately.
How can I tell the boots on this CV axle need attention?
A cracked or split boot, or grease spray around the joint, is a sign of wear. Look only with the engine off and the car parked; a shop can check the joint itself.
What axle bolt size goes with the TrakMotive AD-8112 shaft?
The axle bolt for TrakMotive AD-8112 has M16x1.5 thread, a 27 mm hex and a 97 mm length. The outboard joint is a spline-bolt type with 38 splines.
