TrakMotive BM-8130 front right CV axle shaft for the 2014-2018 BMW 640i xDrive and other vehicles carries drive torque to the front right wheel. Its inboard and outboard joints let the wheel keep turning while the suspension moves and the wheel steers.
- Male inboard joint with 27 splines
- Outboard joint with 37 splines and one spline bolt
- Neoprene boots on both the inboard and outboard joints
Quick facts
- Part: TrakMotive BM-8130 CV axle shaft
- Fits: 2014-2018 BMW 640i xDrive and other vehicles
- Position: Front right
- Material: Neoprene joint boots
- Condition: New
A clicking or popping noise on tight turns, or vibration while driving, can mean the axle joints are wearing. Before you replace this axle, rule out a worn wheel bearing or an unbalanced tire, since either can also cause vibration. The front axle takes one axle shaft on each side; this listing is the front right one, and the front left is ordered separately.
Fits
It fits the 2014-2018 BMW 640i xDrive, the 2012-2016 BMW 528i xDrive and the 2011-2016 BMW 535i xDrive.
Specifications
Fit and size
- Position: front right
- Quantity per vehicle: 1
- Overall compressed length: 863 mm (33.98 in)
- Inboard splines: 27
- Outboard splines: 37
- Axle bolt: M16x1.5 thread, 17 mm hex, 84 mm long
- Outboard joint bolt holes: 1
Build and materials
- Inboard joint: male, spline connection
- Outboard joint: Audi-style spline bolt
- Joint boots: neoprene, inboard and outboard
- ABS tone ring: not included
- Condition: new
- Warranty: TrakMotive limited lifetime warranty
- Country of origin: China
In the box
One CV axle shaft. The axle nut is not included.
Interchange: NCV27046 · PR27046 · 31607593044 · 31607618680 · BM10541ER
This part cross-references / interchanges with the following part numbers:
NCV27046, PR27046, 31607593044, 31607618680, BM10541ER, BM-8130
Frequently Asked Questions
Does the TrakMotive CV axle BM-8130 fit the 2012-2016 BMW 528i xDrive?
Yes. TrakMotive BM-8130 is a front right axle shaft for the 2012-2016 BMW 528i xDrive, sold as one axle for that side.
Does this TrakMotive CV axle shaft come with the axle nut?
No. TrakMotive BM-8130 is sold as one axle shaft without the axle nut, and the ABS tone ring is not included either.
How many splines and how long is this front right axle shaft?
The inboard joint has 27 splines and the outboard joint has 37. Overall compressed length is 863 mm (33.98 in).
How do I check the boots on a front right CV axle shaft?
With the car parked and the engine off, look at the neoprene boots for tears or grease spatter around the joints. A torn boot or a clicking noise on turns is a reason to have the axle inspected promptly.
Does TrakMotive BM-8130 replace NCV27046?
Yes. NCV27046 is one of the numbers TrakMotive BM-8130 interchanges with, along with PR27046 and BM10541ER.
