TrakMotive CH-8279 front right CV axle shaft for the 2011-2014 Jeep Compass and other vehicles carries drive torque to the wheel and flexes with the suspension.
- Neoprene boots on both the inboard and outboard joints
- Female inboard joint with 28-2T splines
- Conventional outboard joint with 28 splines
- Axle nut included, M22x1.5 thread with a 32 mm hex
- Overall compressed length of 587 mm (23.11 in)
Quick facts
- Part: TrakMotive CH-8279 CV axle shaft
- Fits: 2011-2014 Jeep Compass and other vehicles
- Position: Front right
A torn boot with grease thrown around it, or a click when turning, can mean a joint is wearing. Before you replace this shaft, rule out a worn wheel bearing or loose wheel hardware, since those can make similar noises. The front axle has one shaft on each side. This listing is one shaft, for the front right; the left is a separate part, and both sides are normally replaced together.
Fits
This TrakMotive CV axle shaft fits the 2011-2014 Jeep Compass, the 2011-2014 Jeep Patriot and the 2007-2012 Dodge Caliber.
Specifications
Fit and size
- Position: front right
- Quantity per application: 1
- Overall compressed length: 587 mm (23.11 in)
- Inboard splines: 28-2T
- Outboard splines: 28
- Axle nut: M22x1.5 thread, 32 mm (1.25 in) hex, cotter pin locking
Build and materials
- Inboard joint: female
- Outboard joint: conventional
- Joint boot material: neoprene (inboard and outboard)
- ABS tone ring: not included
- Warranty: TrakMotive limited lifetime warranty
- Country of origin: China
In the box
One CV axle shaft with its axle nut. The ABS tone ring is not included.
Interchange: 139279 · NCV82024 · 52123872AA · 52123872AB · CH10016ER
This part cross-references / interchanges with the following part numbers:
139279, NCV82024, 52123872AA, 52123872AB, CH10016ER, CH-8279
Frequently Asked Questions
Does the TrakMotive CH-8279 fit the 2007-2012 Dodge Caliber?
Yes. This TrakMotive CH-8279 is a front right axle shaft for the 2007-2012 Dodge Caliber. The left side is a separate part.
Does the TrakMotive CV axle come with its axle nut?
Yes, the CH-8279 includes its axle nut, which locks with a cotter pin. The ABS tone ring is not included.
What socket size fits the nut on the TrakMotive CV axle shaft?
A 32 mm socket. This axle nut has a 32 mm hex (1.25 in) and an M22x1.5 thread.
Is a clicking noise when turning a sign this CV axle shaft needs replacing?
It can be. A torn boot with grease thrown around it, or a click or pop in turns, can mean a joint is wearing. Have a shop inspect it promptly.
Is the TrakMotive CH-8279 the same as 52123872AA?
Yes. 52123872AA is one of the numbers the CH-8279 replaces, along with 52123872AB, 139279, NCV82024 and CH10016ER.
