TrakMotive GM-8441 front right CV axle shaft for the 2018-2021 Chevrolet Equinox carries drive torque to the wheel while the suspension moves. This TrakMotive CV axle links the transmission side to the wheel through a splined joint at each end.
A clicking or popping noise on turns, grease thrown from a torn boot, or vibration under acceleration can mean an axle is wearing out. These signs alone do not prove the axle is the problem; a worn wheel bearing can make noise too.
This CV axle shaft is a direct-fit replacement for the 2018-2021 Chevrolet Equinox, which takes one on the front right. The front left is a separate part.
Fit and size
Build and materials
One CV axle shaft with its axle nut. The ABS tone ring is not included.
Interchange: NCV10188 · 84305522
This part cross-references / interchanges with the following part numbers:
Does this CV axle fit the 2018-2021 Chevy Equinox?
Yes. TrakMotive GM-8441 is the front right CV axle shaft for the 2018-2021 Chevrolet Equinox. The front left side is a separate part.
Does this TrakMotive CV axle shaft come with the axle nut?
Yes. The GM-8441 from TrakMotive includes the axle nut, which has stake locking. The ABS tone ring is not included.
What socket size does the axle nut on this front right axle need?
The axle nut has a 32 mm (1.25 in) hex and an M24x1.5 thread, so it takes a 32 mm socket.
How can I tell if my front right CV axle is worn?
With the engine off, look for a torn boot or grease flung around the wheel. A clicking noise on turns or vibration under acceleration can also point to wear, and a shop can confirm it.
Does TrakMotive GM-8441 replace NCV10188?
Yes. NCV10188 and 84305522 are listed as interchange numbers for this axle.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
