TrakMotive MI-8176 rear right CV axle shaft for the 2006-2008 Dodge Charger and other vehicles carries drive torque to the rear right wheel. It replaces a shaft whose joint or boot has worn out.
- Magnetic ABS tone ring with 48 teeth, included
- Neoprene boots on both the inboard and outboard joints
- Self-locking axle nut included, M22x1.5 thread with a 32 mm hex
- 27 splines at the inboard end and 27 at the outboard end
- Male inboard joint and conventional outboard joint
Quick facts
- Part: TrakMotive MI-8176 CV axle shaft
- Fits: 2006-2008 Dodge Charger and other vehicles
- Position: Rear right
- Condition: New
A clicking or popping noise when turning, vibration at speed, or grease around a torn boot can mean the joint is worn. A bad wheel bearing, a worn bushing or an out-of-balance tire can cause some of the same signs, so find the cause before buying.
Fits
This rear right CV axle shaft fits the 2006-2008 Dodge Charger, the 2005-2008 Chrysler 300 and the 2005-2008 Dodge Magnum. The 2006-2008 Dodge Charger takes one at this position; the rear left is a separate part.
Specifications
Fit and size
- Position: rear right
- Quantity per vehicle: 1
- Overall compressed length: 814 mm (32.05 in)
- Axle nut thread size: M22x1.5
- Axle nut hex size: 32 mm (1.25 in)
- Inboard splines: 27
- Outboard splines: 27
Build and materials
- Inboard joint: male
- Outboard joint: conventional
- Axle nut: self-locking hex
- ABS tone ring: included, magnetic, 48 teeth
- Joint boots: neoprene
- Condition: New
- Warranty: TrakMotive limited lifetime warranty
- Country of origin: China
In the box
One CV axle shaft with its axle nut and ABS tone ring.
Interchange: 66-3560 · 60-3560 · 60-3680 · 60-3697 · CH-8-8625A · CH-8-8630A · AX-11649
239176 · NCV12589 · 72282 · 4578136AE · 4578778AA · 4578778AB
This part cross-references / interchanges with the following part numbers:
239176, 66-3560, 60-3560, 60-3680, 60-3697, NCV12589, 72282, CH-8-8625A, CH-8-8630A, 4578136AE, 4578778AA, 4578778AB, MI-8176, AX-11649
Frequently Asked Questions
Is this a Dodge Charger CV axle for the 2006-2008 model years, rear right side?
Yes. TrakMotive MI-8176 is the rear right axle for the 2006-2008 Dodge Charger, and it also fits the 2005-2008 Chrysler 300 and the 2005-2008 Dodge Magnum.
Does this TrakMotive CV axle come with the axle nut and ABS ring?
Yes. TrakMotive MI-8176 includes a self-locking M22x1.5 axle nut with a 32 mm hex, and the magnetic ABS tone ring with 48 teeth is included too.
How long is this TrakMotive CV axle shaft and how many splines does it have?
Overall compressed length is 814 mm (32.05 in). The shaft has 27 splines at the inboard end and 27 at the outboard end.
How can I tell if a rear right CV axle shaft joint or boot has failed?
A torn neoprene boot with grease thrown around it, or a clicking noise from the rear wheel when turning, can mean the joint is worn. A shop can confirm it.
Does TrakMotive MI-8176 replace OE number 4578136AE?
Yes. The TrakMotive MI-8176 axle shaft is listed as a replacement for 4578136AE, as well as 4578778AA and 4578778AB.
