TrakMotive MZ-8216 front right CV axle shaft for the 2013-2016 Mazda CX-5 sends drive torque to the wheel and flexes with suspension travel. This TrakMotive CV axle comes with its axle nut.
- Neoprene boots on both the inboard and outboard joints
- 31 splines on the inboard end and 31 on the outboard end
- Male inboard joint and conventional outboard joint
- Self-locking axle nut with an M22x1.5 thread and 32 mm hex
Quick facts
- Part: TrakMotive MZ-8216 CV axle shaft
- Fits: 2013-2016 Mazda CX-5
- Position: Front right
- Condition: New
A clicking noise on turns, vibration under acceleration or grease thrown around a torn boot can mean the axle joints are worn. A worn wheel bearing, a tire problem or a loose suspension joint can be behind similar noise or vibration, so find the cause before buying.
Fits
It fits the 2013-2016 Mazda CX-5, and ABS axles fit non-ABS applications unless otherwise noted. This listing is one shaft for the front right side; the front left shaft on that axle is a separate part and is normally done at the same time.
Specifications
Fit and size
- Position: Front right
- Quantity per application: 1
- Overall compressed length: 1015 mm (39.96 in)
- Inboard splines: 31
- Outboard splines: 31
- Axle nut thread size: M22x1.5
- Axle nut hex size: 32 mm (1.25 in)
Build and materials
- Condition: New
- Inboard joint: male
- Outboard joint: conventional
- Joint boots: neoprene, inboard and outboard
- Axle nut: self-locking, included
- ABS tone ring: not included
- Warranty: TrakMotive limited lifetime warranty
- Country of origin: China
In the box
One front right CV axle shaft and one axle nut. The 2013-2016 Mazda CX-5 takes one shaft on this side.
Interchange: NCV48036 · 40732099 · FTB22550X · FTB22550XA
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Is the TrakMotive MZ-8216 right for the 2013-2016 Mazda CX-5?
Yes. TrakMotive MZ-8216 is the front right CV axle shaft for the 2013-2016 Mazda CX-5, and the car takes one on that side.
Does the TrakMotive CV axle shaft come with the axle nut?
Yes. This front right CV axle shaft includes one self-locking axle nut. The ABS tone ring is not included.
What thread and hex size does the axle nut have?
The axle nut has an M22x1.5 thread and a 32 mm hex (1.25 in), and it is self-locking.
How can I tell if a CV axle boot is failing?
A torn neoprene boot with grease thrown around it, or a clicking noise on turns, can mean a worn joint on this CV axle shaft. A shop can inspect the boots safely on a lift.
How many splines does the TrakMotive MZ-8216 have?
TrakMotive MZ-8216 has 31 splines on the inboard end and 31 on the outboard end. Its overall compressed length is 1015 mm.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review