TrakMotive NI-8688 front left CV axle shaft for the 2017-2019 Nissan Qashqai and other vehicles sends drive torque to the front left wheel. Its two joints let the wheel steer and follow the suspension while it keeps driving.
- Neoprene boots on both the inboard and outboard joints
- Male inboard joint and conventional outboard joint, each with a spline shaft connection
- 27 splines on the inboard end and 29 splines on the outboard end
- Axle nut that locks in place with a cotter pin
Quick facts
- Part: TrakMotive NI-8688 CV axle shaft
- Fits: 2017-2019 Nissan Qashqai and other vehicles
- Position: Front left
- Condition: New
Clicking or popping when you turn, vibration while driving or grease thrown from a split boot can mean this axle is worn. A worn wheel bearing or a tire problem can produce similar noise or vibration, so find the cause first; if the axle is at fault, this one replaces it.
Fits
It fits the 2017-2019 Nissan Qashqai and the 2017-2019 Nissan Rogue Sport, with one axle needed for the front left of each. This listing is a single axle for the left side; the front right is ordered separately, and the two sides of the front axle are normally replaced at the same time.
Specifications
Fit and size
- Position: Front left
- Quantity per vehicle: 1
- Overall compressed length: 710 mm (27.95 in)
- Axle nut thread: M24x1.5
- Axle nut hex size: 32 mm
Build and materials
- ABS tone ring: not included
- Condition: New
- Warranty: TrakMotive limited lifetime warranty
- Country of origin: China
In the box
One CV axle shaft with its axle nut.
Interchange: NCV53124 · 391014BB0B · 391014BB8E · 391016MA0C · 391016MA0E · C91016MA0J
This part cross-references / interchanges with the following part numbers:
NCV53124, 391014BB0B, 391014BB8E, 391016MA0C, 391016MA0E, C91016MA0J, NI-8688
Frequently Asked Questions
Will the TrakMotive NI-8688 fit a 2017-2019 Nissan Rogue Sport?
Yes. TrakMotive NI-8688 is a front left CV axle shaft that fits the 2017-2019 Nissan Rogue Sport and the 2017-2019 Nissan Qashqai.
Does this TrakMotive CV axle come with the axle nut?
Yes, the axle nut comes with the shaft, and it is the cotter-pin locking type. The ABS tone ring is not included.
What size is the axle nut on this TrakMotive CV axle shaft?
The TrakMotive NI-8688 axle nut has an M24x1.5 thread and a 32 mm hex, so a 32 mm socket fits it.
How do I match this front left axle to my old one?
Compare the overall compressed length, 710 mm (27.95 in), and count the splines: 27 on the inboard end and 29 on the outboard end.
Does NCV53124 interchange with this CV axle shaft?
Yes. NCV53124 is listed as an interchange number for the TrakMotive NI-8688 front left axle, along with 391014BB0B and the other numbers on the Interchange line.
