TrakMotive NI-8725 front right CV axle shaft for the 2019-2021 Infiniti QX50 carries drive torque from the transmission to the wheel. Its joints let the wheel keep receiving drive while the suspension moves and the wheel steers.
- Male inboard joint with 29 splines and a conventional outboard joint with 32 splines
- Neoprene boots on both the inboard and outboard joints of this TrakMotive CV axle
- Axle nut included, with an M24x1.5 thread and a 32 mm hex
- Overall compressed length of 1003 mm (39.49 in)
Quick facts
- Part: TrakMotive NI-8725 CV axle shaft
- Fits: 2019-2021 Infiniti QX50
- Position: Front right
- Condition: New
A clicking or popping noise on turns, vibration under acceleration, or grease thrown from a torn boot can mean a CV joint is wearing out. Other parts can cause similar noises, so find the cause before replacing the axle. With the engine off, start by looking near the joint for a torn boot or fresh grease, and leave play testing to a shop.
Fits
This axle fits the 2019-2021 Infiniti QX50, which takes one for the front right side. The front left is its own part and is ordered separately.
Specifications
Fit and size
- Position: front right
- Quantity per vehicle: 1 for this side
- Overall compressed length: 1003 mm (39.49 in)
- Inboard joint: male, 29 splines
- Outboard joint: conventional, 32 splines
- Axle nut thread: M24x1.5
- Axle nut hex size: 32 mm (1.25 in)
Build and materials
- Joint boots: Neoprene, inboard and outboard
- Axle nut: included, cotter pin locking
- ABS tone ring: not included
- Condition: New
- Warranty: TrakMotive limited lifetime warranty
- Country of origin: China
In the box
One CV axle shaft and one axle nut. The ABS tone ring is not included.
Interchange: 39100-5NA2A
C91005NA2J
This part cross-references / interchanges with the following part numbers:
39100-5NA2A, 391005NA2A, C91005NA2J, NI-8725
