TrakMotive SB-8080 rear CV axle shaft for the 2010-2014 Subaru Outback and other vehicles sends drive torque to the rear wheel while the suspension moves. A male inboard joint and a conventional outboard joint connect the shaft at each end.
- Neoprene boots on both the inboard and outboard joints
- Axle nut included, with a 32 mm hex and an M22x1.5 thread
- 25 inboard splines and 27 outboard splines
- Overall compressed length of 803 mm (31.61 in)
Quick facts
- Part: TrakMotive SB-8080 CV axle shaft
- Fits: 2010-2014 Subaru Outback and other vehicles
- Position: Rear
- Material: Neoprene boots (inboard and outboard joints)
- Condition: New
Clicking or popping in turns, vibration at speed, or grease thrown from a torn boot can mean an axle is wearing out. These signs alone do not prove the axle is the problem, since a worn wheel bearing can make similar noise. Plan to replace the rear axles as a pair: this listing is one shaft, and the car takes two, one at each rear wheel.
Fits
This axle fits the 2010-2014 Subaru Outback, the 2010-2014 Subaru Legacy and the 2018-2022 Subaru Crosstrek.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 2
- Overall compressed length: 803 mm (31.61 in)
- Inboard joint: Male, 25 splines
- Outboard joint: Conventional, 27 splines
- Axle nut thread size: M22x1.5
- Axle nut hex size: 32 mm (1.25 in)
- Axle nut height and length: 20 mm by 35 mm
Build and materials
- Joint boots: Neoprene, inboard and outboard
- Axle nut locking type: Stake
- ABS tone ring: not included
- Condition: New
- Warranty: TrakMotive limited lifetime warranty
- Country of origin: China
In the box
One CV axle shaft and one axle nut.
Interchange: 60-7444 · SB-8-8538
299080 · NCV66095 · NCV66925 · PR66925 · PR68052 · 28421AJ01A · 28421AJ01B
This part cross-references / interchanges with the following part numbers:
299080, 60-7444, NCV66095, NCV66925, PR66925, PR68052, SB-8-8538, 28421AJ01A, 28421AJ01B, SB-8080
Frequently Asked Questions
Is the TrakMotive SB-8080 right for the 2018-2022 Subaru Crosstrek?
Yes. TrakMotive SB-8080 is a rear CV axle shaft that fits the 2018-2022 Subaru Crosstrek. The car takes two, one at each rear wheel.
Does this TrakMotive CV axle come with the axle nut?
Yes. The axle nut is included (M22x1.5 thread, 32 mm hex, stake locking), but the ABS tone ring is not.
How long is the TrakMotive CV axle shaft?
TrakMotive SB-8080 has an overall compressed length of 803 mm (31.61 in). The inboard end is a male joint with 25 splines, and the outboard end has 27 splines.
Does a clicking noise in turns mean a rear CV axle is worn?
It can. Clicking in turns, vibration or grease around a torn neoprene boot can all be signs of a worn axle. A shop can inspect the joints and boots to confirm.
Does the TrakMotive SB-8080 replace part number 60-7444?
Yes, TrakMotive SB-8080 replaces 60-7444, along with 28421AJ01A and 28421AJ01B.
