TrakMotive TO-8328 rear CV axle shaft for the 2011-2020 Toyota Sienna sends drive torque to the wheel as the joints flex with suspension travel. This TrakMotive CV axle pairs a flange inboard joint with a conventional outboard joint.
A clicking noise on turns, vibration under acceleration or grease thrown from a torn boot can mean the axle is worn. Before you replace it, rule out a loose axle nut or a worn wheel bearing, since either can make a similar noise; a shop can diagnose it.
It is a direct-fit CV axle replacement for the 2011 Toyota Sienna and the later model years through 2020.
Fit and size
Build and materials
One rear CV axle shaft with its axle nut. The 2011-2020 Toyota Sienna takes two, so order two and fit them together.
Interchange: 329328 · NCV69107 · NCV69185 · 90189 · 4234008020 · 4234008021
This part cross-references / interchanges with the following part numbers:
Is this a CV axle for the 2011 Toyota Sienna?
Yes. TrakMotive TO-8328 is a rear CV axle shaft that fits the 2011-2020 Toyota Sienna, and the vehicle takes two.
Is TO-8328 a CV axle replacement for the 2012 Toyota Sienna?
Yes. This rear shaft covers the 2012 model year within the 2011-2020 Toyota Sienna range.
Does this TrakMotive CV axle shaft come with the axle nut?
Yes. TrakMotive TO-8328 includes the axle nut, which has an M22x1.5 thread and a 30 mm hex and locks by staking.
Does this axle include the ABS tone ring?
Yes. This rear axle shaft has a toothed ABS tone ring with 48 teeth.
What does a torn neoprene boot on this rear axle shaft mean?
A torn or cracked boot can let grease out and dirt into the joint. A boot that is damaged or slinging grease is a reason to have a shop inspect the axle promptly.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
