TrakMotive VW-86013 rear CV axle shaft for the 2017-2019 Porsche 718 Boxster and other vehicles carries drive torque to the rear wheel. The TrakMotive CV axle shaft has joints that let the wheel move with the suspension while the shaft keeps turning.
- Bolt-on inboard joint with 6 bolt holes
- Conventional outboard joint with 28 outboard splines
- Neoprene boots on both the inboard and outboard joints
- Overall compressed length of 538 mm (21.19 in)
Quick facts
- Part: TrakMotive VW-86013 CV axle shaft
- Fits: the 2017-2019 Porsche 718 Boxster and other vehicles
- Position: Rear
- Condition: New
A clicking noise in turns, vibration under acceleration or a torn joint boot with grease around it can mean the CV axle shaft is worn. If the shaft is the cause, this one replaces it. Before ordering, notice whether the click happens mainly in turns and whether a torn boot is visible without lifting the car; a shop can test the rest.
Fits
It also fits the 2017-2019 Porsche 718 Cayman and the 2013-2016 Porsche Boxster. Each car calls for two, one per rear wheel. This listing is one shaft, and the other rear side is normally replaced at the same time.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 2
- Overall compressed length: 538 mm (21.19 in)
- Axle nut thread size: M22x1.5
- Axle nut hex size: 32 mm (32 mm socket)
- Axle nut height: 19 mm
- Outboard shaft bolts: 1
Build and materials
- Inboard joint: bolt-on, 6 bolt holes
- Outboard joint: conventional, 28 splines
- Boot material: neoprene (inboard and outboard)
- ABS tone ring: not included
- Condition: New
- Warranty: TrakMotive limited lifetime warranty
- Country of origin: China
In the box
One CV axle shaft. The axle nut and the ABS tone ring are not included, so plan on a new axle nut, since the old one may not be reusable.
Frequently Asked Questions
Does the TrakMotive CV axle VW-86013 fit the 2017-2019 Porsche 718 Boxster?
Yes. TrakMotive VW-86013 is a rear CV axle shaft for the 2017-2019 Porsche 718 Boxster and other vehicles. If your car is not named here, look it up in the "Vehicles it fits" section.
Is the axle nut included with this rear CV axle shaft?
No. This rear CV axle shaft comes without the axle nut and without the ABS tone ring, so plan on a new nut because the old one may not be reusable.
What thread and socket size does the axle nut need on this CV axle shaft?
The axle nut for the TrakMotive VW-86013 has an M22x1.5 thread and a 32 mm hex, so a 32 mm socket fits it. The nut is 19 mm tall.
Why does my rear CV axle shaft click in turns, and can a torn boot be involved?
A click in turns or vibration can mean a worn CV joint, and a torn neoprene boot that lets grease out can lead to joint wear. A shop can test it, since a wheel bearing can also make noise.
What is the overall compressed length of this rear CV axle shaft?
The TrakMotive VW-86013 measures 538 mm (21.19 in) overall compressed length, a number you can compare with your old shaft.
