Walker Products Engine Cooling Fan Switch P/N:212-1004
Keep your electric cooling fan cycling on cue and hold engine temperature in check with the Walker Products Engine Cooling Fan Switch 214-1019. This OE-replacement switch drops into vehicles like the 1990-1993 and 1995-1997 Honda Accord, 1992-1994 Acura Vigor, 1992-1996 Honda Prelude, 1996-1997 Isuzu Oasis, and 1997-1999 Acura CL, regulating the electric radiator or condenser fan based on engine coolant temperature.
A failing fan switch can show up as overheating, a fan that runs longer than it should, or weak A/C performance. Diagnose the cause first; if a faulty switch is behind the trouble, replacing it with 214-1019 returns accurate temperature-based fan control. See the Buyer's Guide tab for engine specifics.
Interchange: 201-1608 · 53-7579 · 7.5179
2011608 · 537579 · 75179 · E1892 · E1892C · 1T1003 · WT680 · 36460 · 8522 · 88924734 · J5654011 · 37773PT3004 · 37773PT3505 · 37773PT3A01 · 5862028400 · 812 · TS254 · 50058 · TU188 · 0915240
This part cross-references / interchanges with the following part numbers:
What does the Walker 214-1019 cooling fan switch do?
It monitors engine coolant temperature and closes or opens the fan circuit at a set threshold, signaling the electric radiator or condenser fan to turn on when cooling is needed and off once temperature drops.
Which vehicles does it fit?
It's a direct-fit replacement for the 1990-1993 and 1995-1997 Honda Accord, 1992-1994 Acura Vigor, 1992-1996 Honda Prelude, 1996-1997 Isuzu Oasis, and 1997-1999 Acura CL. See the Buyer's Guide tab for engine specifics.
What are the signs of a failed cooling fan switch?
Common signs include engine overheating, a fan that runs longer than it should or won't cycle, and poor A/C performance. Diagnose the cause before replacing, since these symptoms can have other sources.
Where does this switch install?
It threads into the original mounting location — typically the radiator tank, cylinder head, or thermostat housing — and connects to the factory harness with no trimming, wiring, or reprogramming.
Is any calibration or wiring needed?
No. It's calibrated to match the factory switching temperature, thread pitch, and electrical connection, so it installs in the original location and works with the existing harness.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.