Walker Products Exhaust Gas Recirculation (EGR) Valve P/N:570-5059
Walker Products 570-5042 exhaust gas recirculation (EGR) valve for the 1995 Chevrolet Lumina APV V6 3.8L and other vehicles sends a portion of exhaust gas back into the intake manifold. Lower peak combustion temperatures mean fewer nitrogen oxide (NOx) emissions.
An emissions-related fault code or a rough idle can mean the EGR valve is sticking or has failed. These signs alone do not prove the valve is at fault, since a vacuum leak can also upset the idle. If the valve is the cause, this one replaces it.
This EGR valve is a direct-fit replacement for the 1995 Chevrolet Lumina APV V6 3.8L, the 1995 Buick LeSabre V6 3.8L and the 1995 Buick Park Avenue V6 3.8L. Flow rate, actuation timing, electrical connectivity and valve position control are built to OE-level specifications. Driving a different 1995 model? Enter your car in the "Vehicles it fits" section to see whether this valve is matched to it.
Fit and size
Build and materials
One EGR valve with mounting hardware. This listing holds one valve, and the 1995 Chevrolet Lumina APV V6 3.8L takes one.
Interchange: 214-5007 · 130-507
4F1053 · EGR1093 · EG10023 · 9150 · 9152 · 9153 · 12578042 · 17113283 · EGV514 · EGV514T · 10519 · EGR1027
This part cross-references / interchanges with the following part numbers:
Does the Walker Products 570-5042 EGR valve fit the 1995 Buick LeSabre V6 3.8L?
Yes, Walker Products 570-5042 is listed for the 1995 Buick LeSabre V6 3.8L, 1995 Chevrolet Lumina APV V6 3.8L and 1995 Buick Park Avenue V6 3.8L; for other cars, use the "Vehicles it fits" section.
Does the Walker Products 570-5042 come with mounting hardware?
Yes. Walker Products 570-5042 includes mounting hardware with the single EGR valve in the box.
What connector does this EGR valve use?
This EGR valve has one oblong female connector with five male spade terminals. The valve body has two mounting holes.
What signs besides a rough idle can a sticking EGR valve show?
Hesitation or an emissions-related fault code can go with a sticking EGR valve. A shop can test the valve, since that check needs the engine running.
Does this Walker EGR valve need any modification to install?
No. This valve goes onto the factory mounting points and plugs into the original wiring without changes.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.