Walker Products 215-91039 fuel injection idle air control valve for the 1995-1997 Chevrolet Camaro V8 5.7L and other vehicles regulates the air that bypasses the throttle plate to hold a steady idle. The engine control unit drives the valve, so idle speed stays even as conditions change and the engine is less likely to stall.
- Pintle shape, stepper motor response, voltage range and airflow control curves follow factory specifications
- Regulates bypass air around the throttle plate during warm-up, A/C or power steering load and deceleration
- Helps steady idle and starting when a faulty or sticking idle air control valve is the cause
- Sealed housing built to withstand heat, vibration and fuel vapor exposure
Quick facts
- Part: Walker Products 215-91039 fuel injection idle air control valve
- Fits: 1995-1997 Chevrolet Camaro V8 5.7L and other vehicles
- Material: Plastic housing
- Condition: New
Erratic idle speed, stalling, hard starting or an illuminated check engine light can mean the valve is failing. A vacuum leak can also upset idle, so these signs alone do not prove the valve is the problem.
Fits
This idle air control valve is also an OE replacement for the 1995-1996 Chevrolet Impala V8 5.7L and the 1995-1997 Pontiac Firebird V8 5.7L. This listing is one valve, and the 1995-1997 Chevrolet Camaro V8 5.7L takes one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Terminals: 4, blade type
- Mounting holes: 2
Build and materials
- Housing material: Plastic
- Condition: New
- Country of origin: China
Installation notes
- Goes into the throttle body using the factory connectors and mounting points.
- No wiring or modifications are required.
Interchange: 217-433 · 73-4331
2H1044 · 21965 · CV10036 · AC139DG · 17113188 · AC125 · 8458 · AC139
This part cross-references / interchanges with the following part numbers:
217-433, 2H1044, 21965, 73-4331, CV10036, AC139DG, 17113188, AC125, 8458, AC139
Frequently Asked Questions
Is the Walker 215-91039 idle air control valve right for a 1995-1997 Chevrolet Camaro V8 5.7L?
Yes. Walker Products 215-91039 fits the 1995-1997 Chevrolet Camaro V8 5.7L, and the car takes one valve. If you drive a different model, find it in the "Vehicles it fits" section.
How does the Walker 215-91039 control idle speed?
The engine control unit commands the valve to adjust the air bypassing the throttle plate. That holds idle speed steady through warm-up, A/C or power steering load and deceleration.
How many terminals and mounting holes does the Walker 215-91039 have?
Walker Products 215-91039 has four blade terminals and two mounting holes.
Could erratic idle and stalling mean my idle air control valve has failed?
They can accompany a failing valve, along with hard starting or a check engine light. A shop can test the valve before you replace it.
Do I have to rewire anything to install this Walker idle air control valve?
No. It goes into the throttle body on the factory connectors and mounting points, with no rewiring or changes needed.
