Walker Products 250-241034 oxygen sensor for the 2014-2018 Kia Sorento V6 3.3L and other vehicles measures the oxygen in the exhaust gas to show combustion efficiency. It is a four-wire narrow-band sensor for the upstream right, upstream rear position.
- Made for its specific application, with the diagnostic feedback the ECU requires
- Reads exhaust oxygen content and monitors the air-fuel ratio, helping fine-tune the mixture for fuel economy
- Monitors exhaust gases to help reduce pollutants
- Electrodes coated with a gas-permeable platinum layer
- Coating resists contamination and erosion of the electrode surfaces from combustion residue and particulates
Quick facts
- Part: Walker Products 250-241034 oxygen sensor
- Fits: 2014-2018 Kia Sorento V6 3.3L and other vehicles
- Position: Upstream right, upstream rear
- Condition: New
A failing sensor can show up as the engine running poorly, higher fuel use or a lit check engine light. A vacuum leak can also make an engine run poorly, so the signs alone do not prove the sensor is the problem. The sensor, its wiring harness and the connector should also be checked for physical damage.
Fits
As a direct-fit oxygen sensor for the 2013-2018 Hyundai Santa Fe V6 3.3L and the 2019 Hyundai Santa Fe XL V6 3.3L, it also fits many other Hyundai and Kia models. If your car is not named here, look up your own year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: upstream right, upstream rear
- Wires: 4
- Quantity: 1 per listing
Build and materials
- Type: narrow-band
- Electrodes: gas-permeable platinum layer
- Condition: new
In the box
This listing holds one oxygen sensor. The upstream right, upstream rear position takes one, and sensors for other positions are ordered separately.
Frequently Asked Questions
Is this the right oxygen sensor for a 2014-2018 Kia Sorento V6 3.3L?
Yes. Walker Products 250-241034 is listed for the 2014-2018 Kia Sorento V6 3.3L. It is the upstream right, upstream rear sensor, sold one per listing.
Is this Walker Products oxygen sensor narrow-band or wideband?
It is narrow-band. Walker Products 250-241034 is a four-wire sensor that measures the oxygen content of the exhaust gas.
What are the electrodes on this oxygen sensor made of?
The electrodes are coated with a gas-permeable platinum layer. The coating protects the electrode surfaces from contamination and erosion by combustion residue and particulates in the exhaust.
How can I tell if this oxygen sensor is going bad?
A failing sensor can show up as rough running, higher fuel use or a lit check engine light. Look the sensor, wiring and connector over for physical damage with the engine off.
Is 250-241034 an upstream oxygen sensor?
Yes. Walker Products 250-241034 is cataloged as upstream right, upstream rear. This listing is one sensor, and other positions are separate parts.
