Walker Products 250-24413 left oxygen sensor for the 1998-2000 Mercedes-Benz C280 V6 2.8L and other vehicles measures the oxygen content of the exhaust gas. This Walker Products oxygen sensor is a 4-wire narrow-band unit for the downstream left position.
- Built for a specific application and fitment position, with the diagnostic feedback the ECU requires
- Monitors exhaust gases and reduces pollutants for a cleaner environment
- Coating protects the electrode surfaces from contamination and erosion by combustion residue and exhaust particulates
- Electrodes made with a gas-permeable platinum layer
- Determines the oxygen content of the exhaust gas to monitor the air-fuel ratio for combustion efficiency
- Measures oxygen levels so the air-fuel mixture can be fine-tuned for fuel economy
Quick facts
- Part: Walker Products 250-24413 oxygen sensor
- Fits: 1998-2000 Mercedes-Benz C280 V6 2.8L and other vehicles
- Position: Downstream left
- Condition: New
A failing sensor can mean the engine runs poorly, fuel consumption rises or the malfunction indicator light comes on, though other faults can produce these too. Before replacing it, look over the sensor, wiring harness and connector for physical damage with the engine off and cool. Newer vehicles also store fault codes in the ECU.
Fits
It fits the 1998-2000 Mercedes-Benz C280 V6 2.8L, the 1998-2000 Mercedes-Benz C43 AMG V8 4.3L and the 1998-2000 Mercedes-Benz CLK320 V6 3.2L, among others. Open the "Vehicles it fits" section and check your own model and engine against it.
Specifications
Fit and size
- Position: downstream left
- Quantity per vehicle: 1
Build and materials
- Type: narrow-band, 4-wire
- Electrodes: gas-permeable platinum layer
- Coating: protects electrode surfaces from combustion residue and particulates
- Condition: New
In the box
One oxygen sensor. This listing is one sensor; the downstream left position takes one, and any other sensor position is a separate part.
Frequently Asked Questions
Will this Mercedes C280 oxygen sensor fit a 1998-2000 model with the V6 2.8L?
Yes. Walker Products 250-24413 is listed for the 1998-2000 Mercedes-Benz C280 V6 2.8L, in the downstream left position.
Is this a narrow-band or wideband oxygen sensor?
Walker Products 250-24413 is a narrow-band oxygen sensor with 4 wires. Its electrodes are made with a gas-permeable platinum layer.
Is this an upstream or downstream oxygen sensor?
It is the downstream left sensor, and that position takes one. Other sensor positions on the vehicle are separate parts.
What can a failing downstream oxygen sensor look like?
It can show as rough running, higher fuel consumption or a lit malfunction indicator light, and the ECU may store a fault code. A shop can read the codes.
What does the coating on this oxygen sensor do?
The coating protects the electrode surfaces from contamination and erosion by combustion residue and particulates in the exhaust gases.
