Walker Products Oxygen Sensor P/N:250-54036
Walker Products 250-54079 oxygen sensor for the 2008-2014 Subaru Impreza H4 2.5L and other vehicles measures the amount of oxygen in the exhaust gas. This upstream sensor is wide-band and uses four wires to report the air-fuel ratio to the ECU.
A failing sensor can show up as rough running, higher fuel consumption or a lit malfunction indicator light. A damaged wiring harness or connector may upset the readings too, so look both over for damage, with the engine off and cool, before you replace the sensor.
It fits the 2008-2014 Subaru Impreza H4 2.5L and the 2014 Subaru WRX STI H4 2.5L, and both cars take one upstream sensor. This listing is one sensor.
Fit and size
Build and materials
Does the Walker Products 250-54079 fit a 2014 Subaru WRX STI H4 2.5L?
Yes. Walker Products 250-54079 fits the 2014 Subaru WRX STI H4 2.5L, and the car takes one sensor.
Is this Walker Products oxygen sensor a wide-band type?
Yes. Walker Products 250-54079 is a four-wire, wide-band air-fuel ratio sensor that reports oxygen content in the exhaust gas.
What does the coating on this oxygen sensor protect?
The coating protects the electrode surfaces from contamination and erosion by combustion residue and particulates in the exhaust gas. The electrodes are a gas-permeable platinum layer.
What signs can go with a failed upstream oxygen sensor?
Poor running, higher fuel consumption or a lit malfunction indicator light can be signs of a failed sensor. A shop can read the fault codes the ECU stores.
Is this oxygen sensor an upstream or downstream sensor?
This oxygen sensor is an upstream unit, and the listing is a single sensor.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.