Walker Products 924-1087 spark plug wire set for the 1983-1989 Porsche 944 4-cylinder 2.5L and other vehicles carries high voltage from the ignition coil or distributor to each spark plug. The spark at each plug ignites the fuel-air mixture in that cylinder.
- ThunderCore PRO series wire set with SAE J2031 rated, Class E silicone EPDM wire construction
- Operating temperature resistance that exceeds 450°F
- 350-ohm Kevlar core, ferrite impregnated and stainless steel wire MAG wound
- Latex silicone layer that adds conductive efficiency and core stability
- Braided inner tape for flexibility and strength
- RFI and EMI suppression technology to limit interference with the ignition
Quick facts
- Part: Walker Products 924-1087 spark plug wire set
- Fits: 1983-1989 Porsche 944 4-cylinder 2.5L and other vehicles
- Condition: New
Misfires, rough idle or hard starting can come from worn wires, but other ignition parts produce those symptoms too. With the engine off and cool, look over each wire and boot for cracks, burn marks or a loose fit, and find the cause before you replace anything.
Fits
This spark plug wire set fits the 1983-1989 Porsche 944 4-cylinder 2.5L and the 1987-1988 Porsche 924 4-cylinder 2.5L. It takes one wire per cylinder, sold as one set.
Specifications
Fit and size
- Quantity per vehicle: 1 set
- Operating temperature resistance: exceeds 450°F
Build and materials
- Wire construction: Class E silicone, EPDM, SAE J2031 rated
- Core: 350-ohm Kevlar, ferrite impregnated, stainless steel wire MAG wound
- Suppression: RFI and EMI
- Condition: New
- Country of origin: United States
In the box
One spark plug wire set with hi-temperature boots, terminals, tips and tubes, plus dielectric grease.
Interchange: 175-5987 · 35-4045 · 671-4107
2X1571 · CH74105 · 700362 · 9115 · 9952 · 4806 · 944 · 54291 · EUC021 · 144027 · 29522 · 4063 · 9407 · 9522 · 9452
This part cross-references / interchanges with the following part numbers:
2X1571, CH74105, 175-5987, 700362, 9115, 35-4045, 671-4107, 9952, 4806, 944, 54291, EUC021, 144027, 29522, 4063, 9407, 9522, 9452
Frequently Asked Questions
Is this spark plug wire set a fit for the 1983-1989 Porsche 944 4-cylinder 2.5L?
Yes. Walker Products 924-1087 is listed for the 1983-1989 Porsche 944 4-cylinder 2.5L, and it takes one wire per cylinder.
What comes with the ThunderCore PRO 924-1087 spark plug wire set?
The set comes with hi-temperature boots, terminals, tips and tubes, plus dielectric grease.
What is the wire construction on this set?
The wire is Class E silicone EPDM construction rated to SAE J2031, with braided inner tape for flexibility and strength.
Do these wires suppress radio interference?
Yes. The Walker Products 924-1087 set uses RFI and EMI suppression technology to minimize interference with the ignition.
How much heat can these ThunderCore PRO wires take?
The operating temperature resistance exceeds 450°F. The set has a 350-ohm Kevlar core, ferrite impregnated and stainless steel wire MAG wound.
