Walker Products 924-1167 spark plug wire set for the 1986-1987 Mercedes-Benz 190E 4-cylinder 2.3L carries high-voltage current from the ignition coil or distributor to the spark plugs. The spark that current feeds ignites the fuel-air mixture in each cylinder.
- ThunderCore PRO line from Walker Products
- Kevlar core that exceeds 450°F for strength at engine temperatures
- Latex silicone layer that improves core stability and conductive efficiency
- RFI and EMI suppression technology to reduce ignition interference
- Braided inner tape for flexibility and strength across engine layouts
- EPDM outer jacket and insulation for protection from environmental conditions
Quick facts
- Part: Walker Products 924-1167 spark plug wire set
- Fits: 1986-1987 Mercedes-Benz 190E 4-cylinder 2.3L
- Condition: New
Misfiring, rough running or hard starting can point to worn wires, but a tired spark plug or a weak ignition coil may be behind it, so find the cause before you replace the set.
Fits
This is a direct-fit replacement for the 1986-1987 Mercedes-Benz 190E 4-cylinder 2.3L. The listing is one set, with one wire for each cylinder.
Specifications
Fit and size
- Engine: L4-2.3L
- Quantity per vehicle: 1 set
Build and materials
- Wire construction: SAE J2031 rated, Class E silicone, Ethylene Propylene Diene Polymer (EPDM)
- Core: 350-ohm Kevlar, ferrite impregnated, stainless steel wire "MAG" wound
- Condition: New
- Country of origin: United States
In the box
One spark plug wire set with hi-temperature boots, OE quality terminals, tips and tubes, plus dielectric grease.
Interchange: 175-5781 · 671-4104 · 35-77396
700809 · 9148 · 9818 · 9821 · 4303 · 144024 · 27513 · 4152 · 9298 · 7513 · 9454
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
175-5781, 700809, 9148, 671-4104, 9818, 9821, 4303, 35-77396, 144024, 27513, 4152, 9298, 7513, 9454
Frequently Asked Questions
Is the Walker Products 924-1167 the right spark plug wire set for the 1986-1987 Mercedes-Benz 190E 4-cylinder 2.3L?
Yes. Walker Products 924-1167 is a spark plug wire set for the 1986-1987 Mercedes-Benz 190E 4-cylinder 2.3L, and the vehicle takes one set.
Do these spark plug wires come with dielectric grease?
Yes. The set comes with dielectric grease, along with hi-temperature boots, OE quality terminals, tips and tubes.
What is the core of the ThunderCore PRO 924-1167 wires made of?
The core is 350-ohm Kevlar, ferrite impregnated and stainless steel wire "MAG" wound. The Kevlar core exceeds 450°F, and the wire also has a latex silicone layer that adds core stability.
Can cracked boots or a misfire mean my spark plug wires are worn?
They can. With the engine off and cool, you can look for cracked insulation or burnt boots. A shop can test the wires if the misfire has other possible causes.
Does Walker Products 924-1167 replace the 175-5781 wire set?
Yes. 175-5781 is one of the numbers Walker Products 924-1167 replaces, along with 671-4104 and 35-77396.
