Walker Products 924-1204 spark plug wire set for the 1991-1995 BMW 318i 4-cylinder 1.8L, the 1996-1999 318i 4-cylinder 1.9L and other vehicles carries high-voltage current from the ignition coil or distributor to each spark plug. That current ignites the fuel-air mixture in the cylinder.
- ThunderCore PRO line of spark plug wire sets from Walker Products
- SAE J2031 rated Class E silicone wire with EPDM construction
- 350-ohm Kevlar core, ferrite impregnated, with stainless steel wire "MAG" wound
- Latex silicone layer for core stability and efficient conductivity
- RFI and EMI suppression technology to limit ignition interference
- Operating temperature resistance that exceeds 450°F
Quick facts
- Part: Walker Products 924-1204 spark plug wire set
- Fits: the 1991-1995 BMW 318i 4-cylinder 1.8L, the 1996-1999 318i 4-cylinder 1.9L and other vehicles
- Condition: New
A misfire, rough idle or hard starting can mean the wires are worn. Those signs alone do not prove the wires are at fault, since a worn spark plug is another common source.
Fits
This ThunderCore PRO set is a direct-fit replacement for the 1991-1995 BMW 318is 4-cylinder 1.8L, the 1996-1999 318is 4-cylinder 1.9L, the 1995 BMW 318ti 4-cylinder 1.8L and the 1996-1999 318ti 4-cylinder 1.9L. If your car is not named here, open the "Vehicles it fits" section and match your exact model and engine.
Specifications
- Quantity per vehicle: 1
- Wire construction: SAE J2031 rated, Class E silicone, EPDM
- Core: 350-ohm Kevlar, ferrite impregnated, stainless steel wire "MAG" wound
- Inner tape: braided
- Temperature resistance: exceeds 450°F
- Suppression: RFI and EMI
- Condition: New
- Country of origin: United States
In the box
One spark plug wire set with hi-temperature boots and OE quality terminals, tips and tubes, plus dielectric grease. This listing is one set, and a vehicle takes one set.
Interchange: 175-5995 · 35-4041 · 671-4103 · 35-77587T
2X1046 · CH74219 · CH7472 · 700883 · 9258 · 9809 · OES809 · 9121 · 9122 · 4324 · 54162 · EUC003 · 9590 · 144023 · 27562 · 4196 · 7562 · 9528 · 9489
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
2X1046, CH74219, CH7472, 175-5995, 700883, 9258, 9809, OES809, 35-4041, 671-4103, 9121, 9122, 4324, 54162, EUC003, 9590, 35-77587T, 144023, 27562, 4196, 7562, 9528, 9489
Frequently Asked Questions
Is this a BMW 318is spark plug wire set for the 1996-1999 4-cylinder 1.9L?
Yes. Walker Products 924-1204 fits the 1996-1999 BMW 318is 4-cylinder 1.9L, and it also fits the 1991-1995 318is with the 4-cylinder 1.8L.
Does the ThunderCore PRO 924-1204 set come with dielectric grease?
Yes. Walker Products 924-1204 comes with dielectric grease, plus hi-temperature boots and OE quality terminals, tips and tubes.
What is the core resistance of this ThunderCore PRO wire set?
The core is a 350-ohm Kevlar core, ferrite impregnated and wound with stainless steel wire. The set resists operating temperatures above 450°F.
What can I look at on old spark plug wires before fitting this set?
With the engine off and cool, look for cracked insulation, burned boots or corroded terminals. A shop can test the wires if you want a firmer answer.
Is the wire in the Walker Products 924-1204 set made of silicone?
Yes. The wire is SAE J2031 rated Class E silicone with EPDM construction, and the set is made in the United States.
