Walker Products 924-1389 spark plug wire set for the 1990-1991 Audi V8 Quattro V8 3.6L and the 1992-1994 V8 Quattro V8 4.2L carries high-voltage current from the ignition coil or distributor to each spark plug. The spark at the plug ignites the fuel-air mixture in that cylinder.
- ThunderCore PRO line from Walker Products
- SAE J2031 rated Class E silicone and EPDM wire construction with an EPDM outer jacket
- 350-ohm Kevlar core, ferrite impregnated, with stainless steel MAG wound wire
- Latex silicone layer that supports conductive efficiency and core stability
- RFI and EMI suppression technology to minimize ignition interference
- Braided inner tape for flexibility and strength
Quick facts
- Part: Walker Products 924-1389 spark plug wire set
- Fits: the 1990-1991 Audi V8 Quattro V8 3.6L and the 1992-1994 V8 Quattro V8 4.2L
A misfire, rough idle or hard starting can come from worn or cracked wires. Worn spark plugs, a weak ignition coil or a fuel-delivery fault can be behind a misfire too, so find the cause before buying new wires.
Fits
This wire set is a direct-fit replacement for the 1990-1991 Audi V8 Quattro V8 3.6L and the 1992-1994 V8 Quattro V8 4.2L.
Specifications
- Quantity per vehicle: 1
- Wire construction: SAE J2031 rated, Class E silicone, EPDM
- Core: 350-ohm Kevlar, ferrite impregnated
- Operating temperature resistance: above 450°F
- Suppression: RFI and EMI
- Country of origin: United States
In the box
This listing is one spark plug wire set, and the vehicle takes one. It comes with hi-temperature boots, OE quality terminals, tips and tubes, plus dielectric grease.
Interchange: 175-6152 · 671-8128 · 35-77430
2X1033 · CH7879 · 700818 · 9031 · 9968 · 8055 · 148001 · 29904 · 8013 · 9415 · 9904 · 9808
This part cross-references / interchanges with the following part numbers:
2X1033, CH7879, 175-6152, 700818, 9031, 671-8128, 9968, 8055, 35-77430, 148001, 29904, 8013, 9415, 9904, 9808
Frequently Asked Questions
Does the Walker 924-1389 wire set fit the 1992-1994 Audi V8 Quattro V8 4.2L?
Yes. Walker Products 924-1389 is listed for the 1992-1994 Audi V8 Quattro V8 4.2L, and the 1990-1991 V8 Quattro V8 3.6L takes it as well.
Do these spark plug wires come with boots and dielectric grease?
Yes. The set includes hi-temperature boots, OE quality terminals, tips and tubes, and it comes with dielectric grease.
What is inside the core of the ThunderCore PRO 924-1389 wires?
A 350-ohm Kevlar core, ferrite impregnated, with stainless steel MAG wound wire and a latex silicone layer. The outer construction is SAE J2031 rated Class E silicone and EPDM.
How do I tell if my spark plug wires are worn out?
With the engine off and cool, look for cracked or burned boots and corroded terminals. A misfire, rough idle or hard starting while driving can also point to worn wires.
Does the Walker 924-1389 wire set replace part number 175-6152?
Yes. 175-6152 is one of the numbers this Walker Products 924-1389 wire set replaces; 671-8128 and 35-77430 are listed too.
