Walker Products 924-1266 spark plug wire set for the 1989-1998 Porsche 911 H6 3.6L carries high-voltage current from the ignition to the spark plugs. That current ignites the fuel-air mixture in each cylinder.
- ThunderCore PRO line wire with SAE J2031 rated, Class E silicone and EPDM construction
- 350-ohm Kevlar core, ferrite impregnated, with stainless steel MAG-wound wire
- Operating temperature resistance that exceeds 450°F
- Latex silicone layer that enhances conductive efficiency and core stability
- RFI and EMI suppression technology to limit ignition interference
- Braided inner tape for flexibility and strength
Quick facts
- Part: Walker Products 924-1266 spark plug wire set
- Fits: 1989-1998 Porsche 911 H6 3.6L
- Condition: New
Worn wires can show up as a misfire, a rough idle or hard starting, and cracked or burnt boots or insulation are also signs of wear. Plugs or a coil can produce those signs too, so with the engine off and cool, look over the boots and insulation for cracks, burn marks or a loose fit before replacing the set.
Fits
This set fits the 1989-1998 Porsche 911 H6 3.6L, and that car takes one set.
Specifications
Fit and size
- Quantity per vehicle: 1 set
- Core resistance: 350 ohm
- Operating temperature resistance: exceeds 450°F
Build and materials
- Wire construction: SAE J2031 rated, Class E silicone, EPDM
- Core: Kevlar, ferrite impregnated, stainless steel MAG wound
- Layer: latex silicone
- Boots: high-temperature
- Condition: New
- Country of origin: United States
In the box
One spark plug wire set with high-temperature boots, terminals, tips and tubes, plus dielectric grease.
Interchange: 175-5998 · 671-6155
CHU605 · 700869 · 9264 · 6102 · 146020 · 29667 · 9667 · 9610 · 9647 · 9652 · 9654 · 9656
This part cross-references / interchanges with the following part numbers:
CHU605, 175-5998, 700869, 9264, 671-6155, 6102, 146020, 29667, 9667, 9610, 9647, 9652, 9654, 9656
Frequently Asked Questions
Is this spark plug wire set right for the 1989-1998 Porsche 911 H6 3.6L?
Yes. Walker Products 924-1266 fits the 1989-1998 Porsche 911 H6 3.6L, and one set is what that engine takes.
Does the ThunderCore PRO 924-1266 set come with dielectric grease?
Yes. Walker Products 924-1266 comes with dielectric grease, plus high-temperature boots, terminals, tips and tubes.
What is the core of these ThunderCore PRO wires made of?
The core is 350-ohm Kevlar, ferrite impregnated, with stainless steel MAG-wound wire. The set also has a latex silicone layer that enhances core stability.
Do cracked boots on spark plug wires mean the set needs replacing?
Cracked or burnt boots and insulation are signs the wires are worn, and you can look for them with the engine off and cool. A shop can test the wires' resistance.
Can Walker Products 924-1266 be used in place of 175-5998?
Yes. 175-5998 is one of the numbers Walker Products 924-1266 replaces; the full cross-reference is on the Interchange line.
