Walker Products 924-1385 spark plug wire set for the 1986-1991 Mercedes-Benz 420SEL V8 4.2L and other vehicles carries high-voltage current from the ignition coil or distributor to the spark plugs.
- ThunderCore PRO line from Walker Products
- SAE J2031 rated, Class E silicone wire with EPDM construction
- Resists operating temperatures above 450°F
- 350-ohm Kevlar core, ferrite impregnated, with stainless steel “MAG” wound wire
- RFI and EMI suppression technology to limit ignition interference
- Latex silicone layer for core stability and conductive efficiency
Quick facts
- Part: Walker Products 924-1385 spark plug wire set
- Fits: 1986-1991 Mercedes-Benz 420SEL V8 4.2L and other vehicles
- Condition: New
A misfire, rough idle or hard starting can mean the wires are worn, though a weak ignition coil or tired spark plugs can be behind those signs too, so find the cause before replacing the set.
Fits
The 1986-1991 Mercedes-Benz 420SEL V8 4.2L, the 1986-1991 Mercedes-Benz 560SEC V8 5.6L and the 1986-1991 Mercedes-Benz 560SEL V8 5.6L all take this wire set, along with other models. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Fit type: vehicle-specific
- Quantity per vehicle: 1 set
Build and materials
- Wire construction: SAE J2031 rated, Class E silicone, EPDM
- Core: 350-ohm Kevlar, ferrite impregnated, stainless steel “MAG” wound
- Layer: latex silicone
- Operating temperature resistance: exceeds 450°F
- Suppression: RFI and EMI
- Condition: New
- Country of origin: United States
In the box
One spark plug wire set with high-temperature boots, terminals, tips and tubes, plus dielectric grease. This listing holds one wire set, and one set is what the car takes.
Interchange: 175-6029 · 35-8004 · 671-8131 · 35-77397
700948 · 9147 · 9366 · 9822 · 8071 · 113M · 113Q · 54248 · EUC053 · 9367 · 148004 · 29909 · 8015 · 9909 · 9805
This part cross-references / interchanges with the following part numbers:
175-6029, 700948, 9147, 9366, 35-8004, 671-8131, 9822, 8071, 113M, 113Q, 54248, EUC053, 9367, 35-77397, 148004, 29909, 8015, 9909, 9805
Frequently Asked Questions
Does the Walker Products 924-1385 spark plug wire set fit the 1986-1991 Mercedes-Benz 560SEC V8 5.6L?
Yes. Walker Products 924-1385 is listed for the 1986-1991 Mercedes-Benz 560SEC V8 5.6L, and the "Vehicles it fits" section shows the other models and engines.
What comes with the ThunderCore PRO 924-1385 wire set?
The set comes with high-temperature boots, terminals, tips and tubes, plus dielectric grease.
What kind of core does this ThunderCore PRO spark plug wire set have?
Walker Products 924-1385 has a 350-ohm Kevlar core, ferrite impregnated and wound with stainless steel “MAG” wire, plus a latex silicone layer that enhances core stability.
How can I tell spark plug wires are worn?
A misfire, rough idle or hard starting can mean worn wires. Cracked or burned boots and insulation can be seen with the engine off and cool, and a shop can test the wires.
Is 175-6029 a number the Walker Products 924-1385 wire set replaces?
Yes. 175-6029 is on the Interchange line for Walker Products 924-1385, along with the other cross-reference numbers listed there.
