Walker Products 924-1820 spark plug wire set for the 2004-2008 Chrysler Crossfire V6 3.2L and other vehicles carries high voltage from the ignition coil or distributor to each spark plug. It is made to OEM specifications and test requirements, and to exceed them.
- ThunderCore PRO line from Walker Products
- SAE J2031 rated Class E silicone wire with Ethylene Propylene Diene Polymer (EPDM) construction
- 350-ohm Kevlar core with operating temperature resistance above 450°F
- Ferrite-impregnated, stainless steel MAG-wound conductor under a latex silicone layer that adds core stability
- RFI and EMI suppression technology to reduce interference with the ignition
- Braided inner tape for flexibility and strength, under an EPDM outer jacket
Quick facts
- Part: Walker Products 924-1820 spark plug wire set
- Fits: 2004-2008 Chrysler Crossfire V6 3.2L and other vehicles
A misfire, rough idle or hard start can mean the wires are worn, though a tired spark plug or a weak ignition coil can sit behind the same symptoms. Check those two before you replace the set.
Fits
This set is listed for a wide range of Mercedes-Benz models, including the 2006 Mercedes-Benz S350 V6 3.7L and the 2001-2005 Mercedes-Benz C240 V6 2.6L. If your car is not named here, find your own year and engine in the "Vehicles it fits" section on this page. The engine takes one wire per cylinder.
Specifications
- Quantity per vehicle: 1 set
- Fit type: Specific
- Wire rating: SAE J2031, Class E silicone, EPDM
- Core: 350-ohm Kevlar
- Operating temperature resistance: exceeds 450°F
- Country of origin: United States
In the box
One spark plug wire set with hi-temperature boots, terminals, tips and tubes, plus dielectric grease.
Interchange: 175-6210 · 35-6231 · 671-6278 · CB-283 · 35-77633
9366K · 700587 · 9848 · E801210 · 6551 · 643 · 146045 · 27712 · 6119 · 7712 · 9660
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
9366K, 175-6210, 700587, 9848, 35-6231, 671-6278, E801210, 6551, CB-283, 643, 35-77633, 146045, 27712, 6119, 7712, 9660
Frequently Asked Questions
Is this the right spark plug wire set for the 2004-2008 Chrysler Crossfire V6 3.2L?
Yes. Walker Products 924-1820 is listed for the 2004-2008 Chrysler Crossfire V6 3.2L, and that engine takes one set.
Does the ThunderCore PRO wire set come with dielectric grease?
Yes. This spark plug wire set includes hi-temperature boots, terminals, tips and tubes, plus dielectric grease.
What are the Walker 924-1820 wires made of?
They use SAE J2031 rated Class E silicone with EPDM construction around a 350-ohm Kevlar core. Operating temperature resistance exceeds 450°F.
How can I tell if my spark plug wires are failing?
A misfire, rough idle or hard start can mean worn wires. With the engine off and cool, you can look for cracked or burned boots and damaged insulation.
Does this wire set reduce ignition interference?
Yes. The ThunderCore PRO set has RFI and EMI suppression technology that minimizes interference with the ignition.
