Front Wheel Bearing and Hub Assembly for 2011-2021 Jeep Grand Cherokee & More - Timken HA590419

$123.99

Timken Wheel Bearing and Hub Assembly HA590419

Timken Wheel Bearing and Hub Assembly HA590419 - view 2

Timken Wheel Bearing and Hub Assembly HA590419 - view 3

Timken Wheel Bearing and Hub Assembly HA590419 - view 4

Part number: HA590419

UPC: 085706025786

Condition: New

Weight: 12.80 LBS

Item Package Quantity: 1

$123.99

Current Stock: 58

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Timken Wheel Bearing and Hub Assembly P/N:HA590419

$123.99

Description

Timken HA590419 front wheel bearing and hub assembly for the 2011-2021 Jeep Grand Cherokee and other vehicles holds the front wheel and lets it spin on the axle. This Timken wheel bearing and hub assembly arrives preset, pre-greased and pre-sealed.

Low runout to reduce noise and vibration
Seals with a reinforced outer case, ribbed rubber inner diameter and a contamination exclusion system
Seal vent holes to prevent damage during installation
Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for load capacity and bearing life

Quick facts

Part: Timken HA590419 wheel bearing and hub assembly
Fits: 2011-2021 Jeep Grand Cherokee and other vehicles
Position: Front
Condition: New

A humming or growling noise that changes with speed, or vibration at the wheel, can mean a worn hub assembly. Before you replace it, rule out the tires, brake parts and the wheel speed sensor first. The vehicle takes two, one on each side of the front axle, so order two and fit them together.

Fits

This hub assembly fits the 2011-2021 Jeep Grand Cherokee, the 2011-2025 Dodge Durango and the 2022 Jeep Grand Cherokee WK.

Specifications

Fit and size

Position: Front
Quantity per vehicle: 2
Bolt circle: 127.00 mm (5.000 in), 5 wheel studs
Flange bolt holes: 3
Flange diameter: 164.77 mm (6.487 in)
Flange offset: 51.97 mm (2.046 in)
Hub pilot diameter: 101.96 mm (4.014 in)
Brake pilot diameter: 72.03 mm (2.836 in)
Wheel pilot diameter: 71.32 mm (2.808 in)
Splines: 32

Build and materials

Type: Hub unit assembly
Drive type: Driven
ABS sensor: 100% tested to monitor wheel speed for the anti-lock braking system
Condition: New

Interchange: WE60581 · 513324 · BR930907

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

WE60581, 513324, BR930907

Buyer's Q&A

Frequently Asked Questions

Is this a wheel bearing for the 2011-2021 Jeep Grand Cherokee?

Yes. Timken HA590419 is a front wheel bearing and hub assembly for the 2011-2021 Jeep Grand Cherokee, and it also fits the 2022 Jeep Grand Cherokee WK.

Are these Timken wheel hubs pre-greased?

Yes. Timken HA590419 comes pre-greased and pre-sealed, and it is preset.

Does 513324 cross to this hub assembly?

Yes. 513324 is one of the numbers this hub assembly replaces, and it is listed on the Interchange line with the other cross-references.

What signs can go with worn Timken front wheel bearings?

A growl that changes when you steer from side to side, or an ABS warning light, can mean a worn bearing, though a wheel speed sensor can cause the light too. Have it inspected promptly.

How many splines does this Timken wheel bearing have?

Timken HA590419 has 32 splines and a 164.77 mm (6.487 in) flange diameter.