Front Wheel Bearing and Hub Assembly for 2001-2009 Volvo S60 & More - Timken HA590187

$248.99

Vehicles this part fits

    Part number: HA590187
    UPC: 053893076669
    Condition: New
    Weight: 7.00 LBS
    Item Package Quantity: 1
    $248.99
    Adding to cart… The item has been added

    Have questions?

    Timken Wheel Bearing and Hub Assembly P/N:HA590187
    Timken Wheel Bearing and Hub Assembly P/N:HA590187
    $248.99
    $248.99

    Timken HA590187 front wheel bearing and hub assembly for the 2001-2009 Volvo S60 and other vehicles holds the wheel and lets it turn on the axle. This Timken wheel bearing is supplied as a hub unit assembly.

    • Preset, pre-greased and pre-sealed hub unit bearing assembly
    • Tests control the design, materials and manufacturing process of each hub bearing assembly
    • Low runout reduces noise and vibration
    • Seals with a reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes against installation damage
    • Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for higher load carrying capacity and longer bearing life
    • ABS sensors are 100% tested to monitor wheel speed for anti-lock braking systems

    Quick facts

    • Part: Timken HA590187 front wheel bearing and hub assembly
    • Fits: 2001-2009 Volvo S60 and other vehicles
    • Position: Front
    • Condition: New

    A worn bearing can show up as a hum or growl that changes with speed, or as vibration through the car. These signs alone do not prove the bearing is at fault, since uneven tire wear can make similar noise. Both front sides are normally done together, and this listing is a single hub assembly; the front axle takes one on each side.

    Fits

    The 2001-2009 Volvo S60, the 2001-2007 Volvo V70 and the 2003-2007 Volvo XC70 are among the cars this hub assembly fits. Driving something else? Look up your own car in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Position: front
    • Quantity per vehicle: 2
    • Bolt circle diameter: 108.11 mm (4.256 in)
    • Wheel studs: 5
    • Flange bolt holes: 4
    • Flange diameter: 135.62 mm (5.339 in)
    • Flange offset: 43.00 mm (1.693 in)
    • Brake pilot diameter: 68.00 mm (2.677 in)
    • Hub pilot diameter: 87.41 mm (3.441 in)
    • Wheel pilot diameter: 65.00 mm (2.559 in)
    • Splines: 36

    Build and materials

    • Type: hub unit assembly, preset, pre-greased and pre-sealed
    • Drive type: driven
    • Condition: new

    Interchange: 051-6193
    WE60679 · 513194 · BR930277

    This part cross-references / interchanges with the following part numbers:

    WE60679, 051-6193, 513194, BR930277

    Frequently Asked Questions

    Are these Timken wheel hubs right for the 2003-2007 Volvo XC70?

    Yes. Timken HA590187 is listed for the 2003-2007 Volvo XC70 in the front position, and that car takes two, one per side. Other cars are in the "Vehicles it fits" section.

    What bolt circle does this Timken wheel bearing and hub assembly have?

    Timken HA590187 has a 108.11 mm (4.256 in) bolt circle with five wheel studs. Its hub pilot diameter is 87.41 mm (3.441 in).

    How can I tell if my Timken front wheel bearings are wearing out?

    A hum or growl that changes with vehicle speed, or vibration you feel through the car, can point to a worn bearing. A shop can test it properly.

    Are the ABS sensors in Timken hub bearings tested?

    Yes. Timken ABS sensors are 100% tested to monitor wheel speed for anti-lock braking systems.

    Is the Timken HA590187 hub unit bearing assembly pre-greased?

    Yes. Timken HA590187 is preset, pre-greased and pre-sealed, and its seals have vent holes that prevent installation damage.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review