SKF BR930935 wheel bearing and hub assembly for the 2014-2015 Chevrolet Cruze and other vehicles lets the wheel turn on the axle. This SKF wheel bearing has the mounting and wheel flange built into one assembly.
- X-Tracker Hybrid Hub product line
- Asymmetrical bearing design with tapered roller bearings inboard and ball bearings outboard
- Orbital forming and magnetic encoder seals in the build
- Seal designs made to keep water out
Quick facts
- Part: SKF BR930935 wheel bearing and hub assembly
- Fits: 2014-2015 Chevrolet Cruze and other vehicles
- Position: Front, rear
A worn wheel bearing and hub assembly can show up as a hum or growl from the wheel that changes with road speed, or as looseness at the wheel. Tires with uneven wear can make similar noise, so with the vehicle parked and the engine off, look over the tires and the hub area for grease leaks or damage before you replace it.
Fits
The 2014-2015 Chevrolet Cruze, the 2016-2017 Buick Cascada and the 2012-2017 Buick Verano take this wheel bearing and hub assembly, along with other vehicles, and each takes two. This listing is one unit, and the other side of the same axle is normally done at the same time. If your vehicle isn't named here, find it in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: Front, rear
- Quantity per vehicle: 2
- Inside diameter: 1.250 in
- Flange diameter: 5.748 in
- Flange offset: 1.656 in
- Hub pilot diameter: 3.592 in
- Brake pilot diameter: 2.780 in
- Wheel pilot diameter: 2.760 in
- Bolt circle diameter: 4.567 in
Build and materials
- Flange shape: Triangular
- Bearing design: Tapered roller inboard, ball outboard
- Seals: Magnetic encoder seals
Interchange: 805984.09B
DL513316 · WE61548 · 102591 · 805984AB · 13583479 · 27102591 · HA590572
This part cross-references / interchanges with the following part numbers:
DL513316, WE61548, 102591, 805984.09B, 805984AB, 13583479, 27102591, BR930935, HA590572
Frequently Asked Questions
Is this the right wheel bearing for a 2014-2015 Chevy Cruze?
Yes. SKF BR930935 fits the 2014-2015 Chevrolet Cruze, and also the 2016-2017 Buick Cascada and the 2012-2017 Buick Verano. For other vehicles, look in the "Vehicles it fits" section.
Is this an SKF front wheel bearing or a rear one?
This wheel bearing and hub assembly is listed for both the front and rear positions. This listing is one unit, and the vehicles it fits take two.
What are the flange and bolt circle sizes on this SKF wheel bearing and hub assembly?
SKF BR930935 has a 5.748 in flange diameter, a 4.567 in bolt circle, a 3.592 in hub pilot diameter and a 1.250 in inside diameter.
What is different about SKF wheel hubs with the X-Tracker Hybrid design?
The asymmetrical design puts tapered roller bearings on the inboard side and ball bearings on the outboard side. This hub also has magnetic encoder seals and orbital forming.
Can a humming wheel noise mean this wheel bearing and hub assembly is worn?
Yes, a hum or growl that changes with speed, or a loose feel at the wheel, can mean the bearing is worn. Have a shop check it promptly.
