Front Wheel Bearing and Hub Assembly for 2005-2010 Dodge Dakota & More - Timken HA590035

$208.99

Timken Wheel Bearing and Hub Assembly HA590035

Timken Wheel Bearing and Hub Assembly HA590035 - view 2

Timken Wheel Bearing and Hub Assembly HA590035 - view 3

Timken Wheel Bearing and Hub Assembly HA590035 - view 4

Part number: HA590035

UPC: 053893551777

Condition: New

Weight: 7.30 LBS

Item Package Quantity: 1

$208.99

Current Stock: 48

Quantity:

Adding to cart… The item has been added

Have questions?

Ask an Expert

Timken Wheel Bearing and Hub Assembly P/N:HA590035

$208.99

Description

Timken HA590035 front wheel bearing and hub assembly for the 2005-2010 Dodge Dakota and other vehicles mounts the wheel and lets it turn on a bearing. This Timken wheel bearing keeps runout low, which reduces noise and vibration and improves braking performance.

Preset, pre-greased and pre-sealed hub unit bearing assembly
Tests control the design, materials and process used to build each hub bearing assembly
Seals with reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes
Bearings with precision profiles, uniform internal geometry and enhanced surface finishes to increase load carrying capacity and extend bearing life

Quick facts

Part: Timken HA590035 wheel bearing and hub assembly
Fits: 2005-2010 Dodge Dakota and other vehicles
Position: Front

A hum or growl that changes with road speed, or vibration at the wheel, can mean a worn bearing. Worn tires, out-of-round brake rotors or loose wheel nuts can be behind these signs too, so find the cause before you buy a hub.

Fits

It fits the 2005-2010 Dodge Dakota, the 2011 Ram Dakota and the 2006-2008 Mitsubishi Raider. The 2005-2010 Dodge Dakota takes two. This listing is one hub; the other side of that axle is normally done at the same time.

Specifications

Fit and size

Position: Front
Quantity per vehicle: 2
Bolt circle: 139.70 mm (5.500 in), 5 wheel studs
Flange bolt holes: 3
Flange diameter: 183.00 mm (7.205 in)
Flange offset: 48.95 mm (1.927 in)
Brake pilot diameter: 78.40 mm (3.087 in)
Hub pilot diameter: 105.04 mm (4.135 in)
Wheel pilot diameter: 77.67 mm (3.058 in)
Spline quantity: 33
Drive type: Driven

Build and materials

Construction: hub unit bearing assembly, preset, pre-greased and pre-sealed
ABS sensors: 100% tested to monitor wheel speed for anti-lock braking systems

Interchange: 402.67002
WE61587 · 513229 · BR930514

Manufacturer's description

Product specs

Vehicles it fits

Interchange numbers

This part cross-references / interchanges with the following part numbers:

WE61587, 402.67002, 513229, BR930514

Buyer's Q&A

Frequently Asked Questions

Do these Timken front wheel bearings fit the 2006-2008 Mitsubishi Raider?

Yes. Timken HA590035 fits the 2006-2008 Mitsubishi Raider, two per vehicle.

Are Timken wheel hubs like the HA590035 pre-greased?

Yes. The Timken HA590035 comes preset, pre-greased and pre-sealed.

What are the bolt circle and flange size of the Timken wheel bearing and hub assembly HA590035?

The bolt circle is 139.70 mm (5.500 in) with 5 wheel studs, and the flange diameter is 183.00 mm (7.205 in). The hub pilot is 105.04 mm and the wheel pilot is 77.67 mm.

What signs show Timken hub bearings are wearing out?

A hum or growl that changes with speed, vibration at the wheel or an ABS warning light can mean a worn bearing. A shop can test the bearing and the ABS side.

What kind of seals does the Timken HA590035 have?

The seals have a reinforced outer case, a ribbed rubber inner diameter, a contamination exclusion system and vent holes that prevent installation damage.