Timken 513137 front wheel bearing and hub assembly for the 1997-2003 Chevrolet Malibu and other vehicles carries the wheel and lets it spin. This Timken wheel bearing is a hub unit assembly with a flange and five wheel studs.
- Tests control the design, materials and manufacturing process of Timken wheel hubs
- Low runout helps reduce noise and vibration
- Seal with reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes against installation damage
- Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for load carrying capacity and bearing life
- ABS sensor 100% tested to monitor wheel speed for the anti-lock braking system
Quick facts
- Part: Timken 513137 wheel bearing and hub assembly
- Fits: the 1997-2003 Chevrolet Malibu and other vehicles
- Position: Front
- Condition: New
A worn hub bearing can show up as a hum or growl that changes with speed, vibration, or an ABS warning light. Before you replace the assembly, rule out tire wear, brake rotor runout and a wheel speed sensor fault, since each of those can bring on similar symptoms.
Fits
The 1997-2003 Chevrolet Malibu, the 2004-2005 Chevrolet Classic and the 1999-2005 Pontiac Grand Am all fit this assembly, along with other vehicles. Open the "Vehicles it fits" section to check your exact model and engine. This listing is one side; the other side of that front axle is normally done at the same time.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2
- Bolt circle: 115 mm (4.528 in), 5 wheel studs
- Flange bolt holes: 3
- Flange diameter: 145.50 mm (5.728 in)
- Flange offset: 37.10 mm (1.461 in)
- Hub pilot diameter: 91.42 mm (3.599 in)
- Brake pilot diameter: 70.60 mm (2.780 in)
- Wheel pilot diameter: 70.10 mm (2.760 in)
Build and materials
- Drive type: Driven
- Spline quantity: 30
- ABS sensor: 100% tested to monitor wheel speed
- Condition: New
In the box
One front wheel bearing and hub assembly. The vehicle takes two, one for each front wheel.
Installation notes
- Comes preset, pre-greased and pre-sealed.
Interchange: 402.62014
WE60735 · BR930080
This part cross-references / interchanges with the following part numbers:
WE60735, 402.62014, 513137, BR930080
Frequently Asked Questions
Is the Timken 513137 a Chevy Malibu wheel bearing for 1997-2003?
Yes. Timken 513137 front wheel bearing and hub assembly fits the 1997-2003 Chevrolet Malibu. For another car, open the "Vehicles it fits" section to check your model and engine.
Does the Timken wheel bearing and hub assembly come pre-greased?
Yes. Timken 513137 is preset, pre-greased and pre-sealed.
How are Timken front wheel bearings like this one sealed?
The seal has a reinforced outer case, a ribbed rubber inner diameter and a contamination exclusion system, plus vent holes that help prevent damage during installation.
What are the bolt circle and pilot sizes of this hub assembly?
Timken 513137 has a 115 mm (4.528 in) bolt circle with 5 wheel studs and a 3-hole flange. The hub pilot is 91.42 mm, the brake pilot 70.60 mm and the wheel pilot 70.10 mm.
What does a worn front wheel bearing sound like?
A low hum or growl that gets louder with road speed is a common sign, sometimes with vibration or an ABS light. A shop can test the bearing and rule out other causes.
