Timken HA590261 wheel bearing and hub assembly for the 2011-2014 Ford Edge and other vehicles carries the wheel and lets it turn. This Timken wheel bearing is a hub unit that comes preset, pre-greased and pre-sealed.
- Tests control the design, materials and manufacturing process of Timken hub bearing assemblies
- Low runout reduces noise and vibration for a smoother ride
- Seals with a reinforced outer case, ribbed rubber inner diameter, contamination exclusion system and vent holes against installation damage
- Bearings with precision profiles, uniform internal geometry and enhanced surface finishes for higher load capacity and longer bearing life
- ABS sensors are 100% tested to monitor wheel speed for the anti-lock braking system
Quick facts
- Part: Timken HA590261 wheel bearing and hub assembly
- Fits: 2011-2014 Ford Edge and other vehicles
- Position: Front, rear
- Condition: New
Before you replace this assembly, rule out tires, brake parts and wiring, because a hum or growl that changes with speed, vibration or an ABS warning light can come from those too. Both sides are normally replaced together, and this listing is one wheel bearing and hub assembly.
Fits
The vehicles it fits include the 2011-2014 Ford Edge, the 2010-2019 Ford Taurus and the 2009-2019 Ford Flex, and each takes two. Other vehicles are listed in the "Vehicles it fits" section, so look up your own year and model there.
Specifications
Fit and size
- Position: front, rear
- Quantity per vehicle: 2
- Bolt circle diameter: 114.30 mm (4.500 in)
- Flange bolt holes: 4
- Wheel studs: 5
- Flange diameter: 145.77 mm (5.739 in)
- Flange offset: 42.95 mm (1.691 in)
- Hub pilot diameter: 92.12 mm (3.627 in)
- Wheel pilot diameter: 63.25 mm (2.490 in)
- Brake pilot diameter: 58.00 mm (2.284 in)
- Splines: 38
Build and materials
- Type: hub unit assembly, preset, pre-greased and pre-sealed
- Drive type: driven
- Condition: new
Interchange: WE60539 · 513275 · BR930742
This part cross-references / interchanges with the following part numbers:
WE60539, 513275, BR930742
Frequently Asked Questions
Is the Timken HA590261 the right Ford Edge wheel bearing for a 2011-2014 Ford Edge?
Yes. Timken HA590261 fits the 2011-2014 Ford Edge, and the car takes two, so this listing is one of the pair.
Are these Timken front wheel bearings, or do they work at the rear too?
The catalog lists Timken HA590261 for both front and rear positions. This listing is one hub assembly, sold individually.
How many studs and splines do these Timken wheel hubs have?
Timken HA590261 has 5 wheel studs, 38 splines and 4 flange bolt holes. Its bolt circle is 114.30 mm (4.500 in).
Do these Timken hub bearings replace 513275?
Yes. 513275 is listed as an interchange number for Timken HA590261.
What are the pilot diameters on this hub assembly?
The wheel pilot is 63.25 mm (2.490 in), the hub pilot is 92.12 mm (3.627 in) and the brake pilot is 58.00 mm (2.284 in).
