Replace a stripped, bent or broken stud and give your lug nut solid threads to clamp the wheel onto with this Dorman wheel lug stud, part number 610-378.1. It fits many vehicles, among them the 1993-2025 Nissan Altima, 2008-2025 Nissan Rogue and 1991-2025 Nissan Sentra. It is a direct-fit replacement for the listed applications and is cataloged for both front and rear positions. See the "Vehicles it fits" section for the full list and engine details.
Dorman makes these lug studs from carbon steel and tests them to demanding automotive industry standards for strength and safety.
- Durable material: carbon steel that meets SAE automotive industry standards for strength and hardness.
- Corrosion resistant: put through extensive salt spray testing to help it resist rust.
- Tensile tested: the studs go through industry-standard proof-load testing to verify their strength.
- Trustworthy quality: backed by Dorman's U.S.-based team of professional engineers and quality-control specialists.
Specifications: M12-1.25 serrated wheel stud with a 14.35mm knurl and a 42mm length.
The serrated knurl grips the mounting bore when the stud is pressed into place, which keeps the stud from turning as the lug nut is tightened. Signs a stud may need replacing include stripped or damaged threads, a bent or broken stud, or a lug nut that will not tighten properly. Tighten the lug nuts to the torque listed in your vehicle's service information.
Interchange: DN610-378
DN610378 · 4322221B00 · 4322221B60 · 4322225B60 · 4322228B10 · 4322241B00 · 4322241B0A · 432225V200 · 4322270T00 · 4322270T0A · 43222KB50A
This part cross-references / interchanges with the following part numbers:
DN610-378, 4322221B00, 4322221B60, 4322225B60, 4322228B10, 4322241B00, 4322241B0A, 432225V200, 4322270T00, 4322270T0A, 43222KB50A
Frequently Asked Questions
What does a wheel lug stud do?
A wheel lug stud is the threaded stud pressed into the hub assembly. The lug nut threads onto it and clamps the wheel in place.
What are the specifications of Dorman 610-378.1?
It is an M12-1.25 serrated carbon steel wheel stud with a 14.35mm knurl and a 42mm length.
Will this wheel lug stud fit my 1993-2025 Nissan Altima?
It is listed for the 1993-2025 Nissan Altima, the 2008-2025 Nissan Rogue and the 1991-2025 Nissan Sentra. Check the "Vehicles it fits" section to confirm your exact vehicle.
How is a serrated wheel stud installed?
The old stud is pressed out and the new one is pressed in so its serrated knurl seats in the bore. Follow your vehicle's service information and torque the lug nuts to spec.
What are signs a wheel lug stud may need replacing?
Signs include stripped or damaged threads, a bent or broken stud, or a lug nut that will not tighten properly.
