Wix Engine Oil Filter P/N:51417
Wix 51810 oil filter for the 1993-1997 Hino FA1415 3.8L and other vehicles and equipment is a heavy-duty spin-on lube filter that strains contaminants out of the engine oil.
A leak around the base gasket, a dented can or an oil pressure warning can mean the filter needs attention. Before you replace it because of a pressure warning, rule out a low oil level and a faulty pressure sender, since either one can light that same warning.
This filter is listed for a wide range of Hino, Caterpillar, Grove and Hyster models, including the 1993-1997 Hino FB1715 3.8L and the 1992 Hino FA15 3.8L. The 1993-1997 Hino FA1415 3.8L takes one filter. If your own truck or machine is not named here, look it up in the "Vehicles it fits" section.
Fit and size
Build and materials
Will the Wix 51810 oil filter fit a 1993-1997 Hino FB1715 3.8L?
Yes. Wix 51810 is listed for the 1993-1997 Hino FB1715 3.8L (L4-3.8L), and that application takes one filter.
What size is the thread on this engine oil filter?
The Wix 51810 has a 1 1/2-12 inch thread. It stands 6.219 inches tall with a top outer diameter of 4.658 inches.
Does this Wix oil filter have an anti-drain back valve?
No. This filter has no anti-drain back valve. It is a spin-on lube filter with enhanced cellulose media.
What flow rate and burst pressure does this spin-on filter have?
This spin-on filter has a flow rate of 28-30 GPM and a burst pressure of 335 PSI.
Is this oil filter made for heavy-duty equipment?
Yes. This Wix 51810 is an HD-duty spin-on lube filter for medium and heavy trucks, farm, construction, mining and other equipment. Its country of origin is the United States.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.