Protect your air conditioning system from moisture and debris with the Four Seasons A/C Receiver Drier 83265, an aluminum filter drier with a pad mount that installs as a direct-fit replacement for the 2008-2012 Ford Escape, 2010 Mazda Tribute, and 2008-2010 Mercury Mariner. See the "Vehicles it fits" section for engine-level fitment.
- Filters and dries: acts as a filter, removing moisture and contaminants from the refrigerant that cannot be cleared by flushing.
- Desiccant absorption: a desiccant bag absorbs system moisture; a leaking or open system can saturate the bag within a few hours, which is why replacement is essential.
- Aluminum build with pad mount: quality welds support a durable, leak-free design.
- Install-ready: the necessary gaskets, o-rings and seal are included.
Backed by over 50 years of mobile A/C experience from Four Seasons and produced in an ISO/TS16949 & ISO14001 certified facility. The drier should be replaced any time the system is opened for service, and replacement is typically required to validate a compressor warranty.
Interchange: CWK709104 · 218116 · T83265 · 709104 · 8M6Z19959A · 8M6Z19959B · 9M6Z19959A · AM6Z19959A · AM6Z19959B · 604619 · 1412013 · ZZEA61500 · YL198 · YL211 · A88116 · 951004 · 3713873 · 170198 · RD11079C
This part cross-references / interchanges with the following part numbers:
CWK709104, 218116, T83265, 709104, 83265, 8M6Z19959A, 8M6Z19959B, 9M6Z19959A, AM6Z19959A, AM6Z19959B, 604619, 1412013, ZZEA61500, YL198, YL211, A88116, 951004, 3713873, 170198, RD11079C
Frequently Asked Questions
What vehicles does this receiver drier fit?
It is a direct-fit replacement for the 2008-2012 Ford Escape, 2010 Mazda Tribute, and 2008-2010 Mercury Mariner. Check the "Vehicles it fits" section for engine-level fitment.
What does an A/C receiver drier do?
It acts as a filter, removing moisture and contaminants from the refrigerant that cannot be cleared by flushing. A desiccant bag inside absorbs moisture in the system.
Are seals included for installation?
Yes. The necessary gaskets, o-rings and seal are included for installation.
When should the receiver drier be replaced?
It should be replaced any time the A/C system is opened for service. Replacement is also typically required to validate a compressor warranty.
What is this drier made of?
It is an aluminum filter drier with a pad mount, built with quality welds for a durable, leak-free design.
