Agility Autoparts Fuel Pump and Sender Assembly P/N:4011074
$71.99
(You save)
Keep fuel moving to the engine with the Agility Auto Parts Fuel Pump and Sender Assembly (MPN 4011074), a drop-in replacement for the 1986-1988 Ford Ranger in both the L4-2.3L and V6-2.9L engines. This left-side unit combines the electric fuel pump and the sending unit in one module, delivering fuel from the tank while reporting the fuel level to the gauge.
Key features:
Strainer inlet: draws fuel through a strainer-type inlet; the outlet is a quick-connect design with a 0.375 in outside diameter.
Rated output: 12-volt DC operation with a maximum flow rating of 35 U.S. gallons per hour and a maximum pressure of 6 PSI.
Tested to spec: engineered and manufactured in a highly automated, dust-free environment and built to match or surpass OEM specifications, with pressure, flow-rate, electrostatic-discharge, and 100% leak testing.
Ready to install: a drop-in replacement right out of the box with all the necessary components included.
Signs the original may need replacing include a no-start or hard-start condition, whining from the tank, stalling under load, or an erratic fuel gauge. Country of origin: Thailand.
What vehicles does this fuel pump and sender assembly fit?
It is a direct-fit replacement for the 1986-1988 Ford Ranger with the L4-2.3L or V6-2.9L engine. Check the Buyer's Guide tab to confirm fitment for your vehicle.
What are the pump's flow and pressure ratings?
It operates on 12 volts DC with a maximum flow rating of 35 U.S. gallons per hour and a maximum pressure of 6 PSI.
What type of inlet and outlet does it use?
The inlet is a strainer type, and the outlet is a quick-connect design with a 0.375 in outside diameter.
Does it include everything needed to install?
Yes. Agility lists this as a drop-in replacement right out of the box with all the necessary components included. Consult the vehicle service information for the correct procedure.
What are signs this fuel pump and sender may need replacing?
Common signs include a no-start or hard-start condition, whining from the tank, stalling under load, or an erratic fuel gauge. Diagnose the cause before replacing.
Write a Review
AGILITY AUTO PARTS
Agility Autoparts Fuel Pump and Sender Assembly P/N:4011074
Keep fuel moving from the tank to the engine with the Agility Auto Parts Fuel Pump and Sender Assembly 4011408. This combined module houses the electric fuel pump and the fuel-level sending unit, and...
Keep fuel moving from the tank to the engine with the Agility Auto Parts Fuel Pump and Sender Assembly, MPN 4011217. This combined in-tank unit both pumps fuel to the engine and senses the fuel level...
Keep fuel flowing to the engine and your fuel gauge reading true with the Agility Auto Parts Fuel Pump and Sender Assembly (MPN 4011045). This in-tank unit combines the electric fuel pump that draws...
Keep fuel flowing from the tank to the engine and your fuel gauge reading accurately with the Agility Auto Parts Fuel Pump and Sender Assembly, MPN 4011103. It installs as a direct-fit replacement...
Keep fuel flowing to the engine and the fuel gauge reading accurately with the Agility Auto Parts Fuel Pump and Sender Assembly (MPN 4011169). This in-tank unit pumps fuel to the engine while its...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
